User's Manual

-4-
2.3 Descriptions of icons on the status bar
Icons Descriptions Icons Descriptions
SIM1 Si
g
nal
Strength
(GSM)
Earphone
activated
SIM2 Si
g
nal
Strength
(GSM)
Key lock
SIM 1 New
Message
/Message full
SIM 2 New
Message /
Message full
Unread MMS
SIM 1 Off
Battery Level
Ringing
PUSH
Message
Vibrate
Connect to
GPRS
Vibrate and
ring
Call Divert
Vibrate then
ring
Missed call Unread FAX_L1
Alarm on
CSD_SIM1
Unread
Email_L1
Audio Play
EDGEC_SIM1 Print
BGSND
Unread_Net_L1
Stopwatch
2.4 SIM Card
This phone supports dual sim standby, before you power
on the phone, make sure at least one sim is inserted in
either sim slot. When dual sim are inserted, you can
-5-
shutdown any working sim card under menu
Settings->Dual SIM Settings.
Note: Dual sim will shorten the standby time compared
to single sim.
2.5 Memory Card
Aim at the T card slot and push the T card gently, and
the card will be inserted correctly.
Note: If the memory card is failed, please check
whether it is correctly placed at good contact of metal
point.
2.6 Battery & Charge
You can charge the battery by connecting the phone
either to a pc USB port or to the provided standard
charger use the provided standard usb cable.
Note: In order to ensure normal operation of the phone,
please make sure to use the designated charger.
2.7 User Passwords
A series of passwords have been set in your mobile
phone and SIM card, for they can prevent any
unauthorized use of your mobile phone and SIM card.
Mobile phone password:
The mobile phone password is the same as the mobile
phone lock password, which could prevent unauthorized
use of your mobile phone as well. The mobile phone
password preset by the manufacturer is 1122. If your
mobile phone is locked, the mobile phone password will
be required to start the mobile phone.
Note: The mobile phone password may include 4~8
digits. Please change the password in time, and
remember what you have set. The password used by
the theft proof trace function is the mobile phone