User's Manual

4.6 Tacle Transducer Installaon
Before you aach the Next Level Moon Plaorm to your cockpit, it is rec-
ommended to aach the Bukicker adapter first. The Bukicker Gamer 2 or
other tacle transducer can be aached to the plaorm using a dedicated
adapter, included with the product.
1. Install the adapter, using 4 aached bolts and nuts (M6 x 16mm)
2. Aach the Bukicker Gamer 2 to the adapter. Refer to the Bukicker
User Manual instrucon.
3. If an alternave tacle transducer is used, maximum weight of the de-
vice that can be installed to the moon plaorm is 2.3 kg (5.0 lbs).
4.7 Moon Plaorm Installaon
1. Remove 4 screws holding the original GTulmate side panels in place.
2. Replace the original side panels with the ones included with the plat-
form to lower the seat.
3. Install the moon unit between the side panels, using 6 included bolts
(M8x20mm). The power switch should be located on the front of the
moon unit.
Product Manual 11