INSTRUCTION MANUAL FOR NEXT LEVEL RACING WHEEL STAND LITE For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
Thank-you for purchasing a Wheel Stand LITE If you require any support with your product please contact our friendly team at: support@nextlevelracing.com for a prompt response.
WHEEL STAND LITE What’s In The Box: GEAR SHIFTER ADAPTOR WHEEL STAND LITE For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
WHEEL STAND LITE Step 1: S Hard mount your pedals to pedal plate before beginning assembly Wheel Plate U bolt Pedal Plate Unpack and unfold the wheel stand. Clip on the U-bolt to secure wheel support. Step 2: S If using gear shifter, attach adaptor using bolts supplied. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
WHEEL STAND LITE Step 3: Bolt to change angle of pedal plate If using pedals in flat position move the bolt position for stronger support. If wanting to adjust angle for pedal plate, remove bolt on both sides of Wheel Stand Lite Step 4: Tip – For quick pedal distance adjustment just loosen the 4 bolts pictured and then slide pedal plate further or closer. Then tighten the 4 bolts to lock in position For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
WHEEL STAND LITE ADJUSTABILITY Step 5: 1. ANGLE 3. PE DA L AD PLAT JU ST E DIS ME TA NT NC E 2. HEIGHT ADJUSTMENT 1. ANGLE 3. PEDAL PLATE DISTANCE ADJUSTMENT For rigidity and having stand strong as possible be sure to go through and tighten all bolts and nuts before use, especially for the steering wheel plate. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
WHEEL STAND LITE NEED ASSISTANCE? If you require any support with your product please contact our friendly team at: support@nextlevelracing.com for a prompt response. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.