INSTRUCTION MANUAL FOR NEXT LEVEL RACING MATTE BLACK SIMULATOR COCKPIT If you require any support with your product or have an issue, please contact our friendly team at: support@nextlevelracing.com for a prompt response.
Thank-you for purchasing a Simulator Cockpit If you require any support with your product or have an issue, please contact our friendly team at: support@nextlevelracing.com for a prompt response. WARNING -Please do not use power tools for assembly as over tightening can damage your frame. -During assembly please be sure to have a washer positioned at the front of every bolt as pictured below.
F-GT SIMULATOR COCKPIT What’s In The Box: LUMBAR/ NECK CUSHION SCREWS FOR WHEEL SHIFTER PEDALS 50MM BOLTS 60MM BOLTS SEAT BASE SEAT BACK For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 1: FRAME ASSEMBLY FLOOR POSTS SIDE FRAMES 1 X 16MM BOLT Repeat both sides Step 2: FRONT PLATE 2 X 50MM BOLTS Repeat both sides Step 3: SUPPORT POST 1 X 50MM BOLT. Repeat both sides. Install SUPPORT POST on third hole from front for GT and last hole for Formula For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 4: SEAT ASSEMBLY 4 X 16MM BOLTS. Repeat both sides. SEAT SIDE FRAMES Attach SEAT SIDE FRAMES to SEAT BASE PLEASE NOTE: DUAL NUT PLATE SITS INSIDE SEAT SLIDER FRAME Step 5: Angle Mounts 2 X 16MM BOLTS. Repeat both sides. Attach ANGLE MOUNTS to SEAT BASE Step 6: 3 X 16MM BOLTS. Repeat both sides. Attach SEAT BACK to ANGLE MOUNTS For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 7: Formula ASSEMBLY WARNING DO NOT OVER TIGHTEN 2 X 60MM BOLTS FOR PEDAL PLATE OR YOU CAN DAMAGE YOUR FRAME WHEEL PLATE 5. Attach PEDAL PLATE to the PEDAL ANGLE BAR using 2 X 16MM BOLTS on each side. Repeat both sides. *For Formula- Recommend attaching at bottom of PEDAL PLATE as pictured 3. 2 X 50MM BOLTS. Repeat both sides. 2. Insert WHEEL SUPPORT BARS. Use the 2 X 16MM BOLTS on each side to adjust height. PEDAL PLATE PEDAL ANGLE BAR 4.
F-GT SIMULATOR COCKPIT Step 8: Formula ATTACHING SEAT 1 X 60MM BOLT. Repeat both sides. 1 X 60MM BOLT. Repeat both sides. Step 9: Formula TIPS - PEDAL ANGLE BAR: This determines the distance of your pedals. If you are a shorter user attach closer to the seat. Opposite for taller users. - In Formula position, for extra comfort you may find the LUMBAR SUPPORT CUSHION provided suitable to use for your neck or head. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 10: GT ASSEMBLY WARNING DO NOT OVER TIGHTEN 2 X 60MM BOLTS FOR PEDAL PLATE OR YOU CAN DAMAGE YOUR FRAME WHEEL PLATE 3. 2 X 50MM BOLTS. Repeat both sides. 5. Attach PEDAL PLATE to frame using 1 X 16MM BOLT. Repeat both sides. 2. Insert Wheel Support Bars. Use 2 X 16MM BOLTS on each side to adjust height. PEDAL PLATE PEDAL ANGLE BAR 1. 2 X 60MM BOLTS. Repeat both sides.
F-GT SIMULATOR COCKPIT Step 11: GT SEAT ASSEMBLY 2 X 60MM BOLTS. Repeat both sides. 2 X 60MM BOLTS. Repeat both sides. Step 12: GT TIPS -In GT position for extra comfort you may find the LUMBAR SUPPORT CUSHION provided suitable to use for your higher back or shoulders. - Many GT users prefer pedals in Formula style position meaning no need to change pedal position. For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 13: GEAR SHIFTER ASSEMBLY 2 X 50MM BOLTS SHIFTER BRACKET SHIFTER ARM Left hand side shifter Step 14: 2 X 50MM BOLTS Right hand side shifter For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 15: BUTTKICKER® GAMER 2 ADAPTOR 2 X 50MM BOLTS For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
F-GT SIMULATOR COCKPIT Step 16: CHANGING FROM Formula TO GT 4. Wheel Angle May need adjustment 3. Seat Angle May need adjustment 1. PEDAL PLATE *Please note many GT users prefer pedals in Formula style position meaning no need for change. Remove the PEDAL PLATE from the PEDAL ANGLE BAR and mount the PEDAL PLATE directly to the FRONT PLATE. 5. Wheel Position May need adjustment 2. GT SUPPORT POSTS Attach GT SUPPORT POSTS on each side to lift seating position . Step 17: CHANGING FROM GT TO Formula .
F-GT SIMULATOR COCKPIT Step 18 (OPTIONAL): For maximum rigidity over adjustability, install optional FELT STRIPS in WHEEL SUPPORT BARS. This means sliding holes in frame won't be effective to change position Step 19: Attach HEIGHT ADJUSTABLE FEET to bottom of cockpit frame For assistance please contact: support@nextlevelracing.com www.nextlevelracing.
