977
FCC Certification THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS : ( 1) THIS DEVICES MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Table of Contents 1. Announcement 2. Function summary 3. Getting to know the player ● Appearance and keystroke ● Display screen 4. Basic functions ● Start up/shutdown ● Enter a menu ● Browse Tracks ● Use different function modes ● Adjust volume ● Key lock function ● Press PLAY 5. Operation ● Music mode , Play mode ● Record mode 6.
7. Voice recorder ● Record mode ● Choose record type ● Play recorded files 8. Transfer recorded file of ACT into WAV on your PC 9. System Setup ● How to enter ● Brief introduction to every options ● Detailed operating instructions 10. Use USB disk ● New folder 11. Upgrade player 12. Miscellaneous settings ● Choose different directories (stop submemu) ● Play mode (play submenu) ● Play speed (play submenu) ● Reread mode (play submenu) ● Reread times (play submenu) ● Reread separation (play submenu) 13.
1. Announcement Thanks for purchasing our MP3 player. Before using the unit please read this manual carefully to obtain the best possible performance from your player and keep it for future reference. 2. Function summar y ● Digital Audio for mats MP1, MP2, MP3, WMA, WMV, ASF, WAV (Easy to work with Windows Media Player). ● Fir mware upgrades (Check periodically) www.macvision.com will provide the latest software upgrades and functions.
● various play modes Can be set to Natural, cycle single song, play directories, cycle directories, cycle all, shuffle or browse. ● Shutdown timer Sleep mode and power-save mode to simplify and extend battery use. ● Full-car toon menu Graphic menus with corresponding text display. ● USB connection Quick connection to USB port. 3.
Display screen Reread mode A B Work mode Play state File format Song number 1 Cycle mode ALL MP3 03 Display electric quantity Pre 04: 13 Play time S k y. M P 3 Singer/Name of song Sound effect mode/Follow and contrast 4. Basic functions Star t up/shutdown Start up or shutdown player by press and hold "PLAY".
Use different function modes Go into different modes from main menu by sliding Mode key clockwise or anti-clockwise then pressing Mode key: Select Music mode, display shows something like this: Main menu: 1 01 01: 13 Jay - Sky.
Adjust volume Decrease volume by pressing VOL-; Increase volume by pressing VOL+. Key lock function Dial HOLD switch to the position of lock. When Hold is ON, any operations on buttons will be displayed as: 1 01 01: 13 Jay - Sky.mp3 When Hold is ON, USB mode will be displayed as: Press PLAY Play or stop (or pause while recording); exit from submenu.
5.
● Record mode Key Play Mode Action Stop state Record state Press Start to record Pause record Hold Shutdown Stop record Press Enter record submenu X Hold Enter main menu X 6. Play music ● Add and Delete files To add and delete music file on your PC or Notebookcomputer to your MP3 player, simply connect the unit to the USB port of your PC or Notebook computer, click open the "RemovableDisk" drive then you can add or delete files.
Delete file (stop submenu) Files can be deleted under their respective modes. 1). On Stop mode. 2). Press Mode to enter "stop submenu". 1 01 01: 13 Jay - Sky.mp3 ROOT 3). Dial Next or Last to choose "delete one" or "delete all". 4). Press Mode to enter delete interface. 5). Dial Next to select "YES". 6). Dial Mode to confirm and begin deleting. Delete file Del. file? Del. file? Delete... "Delete all" will delete all files of the current mode under the current directory.
● Sound effect mode 1 1). Playing music 01 01: 13 Jay - Sky.mp3 2). Enter play submenu by pressing MODE. 3). Dial Next to choose menu item. 4). Enter "Equalizer" by pressing MODE. 5). Dial Next to choose, press Mode to select. 6).
How to know whether a song has lyrics: If there is a lyric file matching the song, the icon mode should change to " " . on the upper left corner of music How to display the lyrics: 1). Find lyric match with song: 2). Press and hold Mode to enter lyric interface. 1 01 01: 13 Jay - Sky.mp3 3). Display lyrics. 4). Return to music mode by pressing Mode. All of your time spent, Every time we're down. 1 01 01: 33 Jay - Sky.mp3 5).
2). Open "My Computer", clean up the device as the following steps: a). Click the MTP device icon use the right button of the mouse, and then select "Format"; b). Waiting for the format processing until finish. 3). Run "WMP10"(Windows Media Player 10), the "MTP" device will be discover. Select "Sync", and then open the local folder where your music files saved. 4).
5). When finish downloading, you can see the music files on the right side of WMP 10.
Browser "My Computer", you can see the files already downloaded to player. 6). Disconnect the player, it will make ID3 Playlist automatic, this will cost about 8 seconds. 7). Then the player will process DRM licence, it will cost 5~10 seconds. How to play At first, you must enter into System setup and setup the "DRM Time"(The detailed operation steps see Pg.19), set it to current time, otherwise the DRM music can't play accurately.
7. Voice recorder Make sure batteries have enough energy for recording. Save ninety-nine recorded files in every directory. ● Record mode 2). Dial Next to choose record mode. 1). Enter main menu. 3). Press Mode to enter record mode. 00:00:00 8K/ACT 0 1 / 1 5 REC04 2 0 0 4 / 0 7 / 2 8 5). Other operations use steps 1 through 3. 4). Press Play to start recording. 6).
7). Press Play to start recording (VOR can pause recording). 8). Record type: 32K/WMA: high-quality, WAV format 8K/ACT: long recordings ACT format 32K/VOR: high-quality, sound control, WAV 8K/VOR: long records, sound control, ACT ● Play Recorded files 1). Enter main menu. 3). Press Mode to enter replay mode. 00:00:00 8K/ACT 0 1 / 1 5 REC04 2 0 0 4 / 0 7 / 2 8 5). Choose record file: Last: choose last record file Next: choose next record file 2). Dial Next to choose "Replay mode". 4).
Set system parameters here; every option should change with firmware upgrade. 1). Enter main menu. 2). Dial Next to choose "system setup". 3). Press Mode to enter "System setup".
● Detailed operating instruction Set "Record time" 1). Interface for system setup. 2). Press Mode to enter the record time interface. 2004-07-27 12:00:01 Record Time 3). Press VOL+/- to select number to change: 4). Dial Next/Last to increase/decrease number: 2004-07-27 12:00:01 2005-07-27 12:00:01 5). Exit by pressing Mode after change. Set "Record Type" 2). Dial Next to choose "Record Type". 1). Interface for setting system. Record type Record Time 3). Press Mode to enter interface. 4).
Set Backlight time 1). Interface for setting system. 3). Press Mode to enter interface. 2). Dial Next to choose "backlight time". Record Time 4). Dial Next/Last to adjust time. 15 Backlight 30 5). To exit press Mode after change. Set Language Press Mode to enter interface, Dial to choose, press Mode to exit.
Online Mode Operating systems earlier than Windows 2000 Service Pack 4 cannot support two partitions. To display chosen disk after connected to PC, You need to choose which disk you want to use between "single normal disk" and "single cryptographic disk" after use the function of "dream space". Online Device Choose which device you want to use when connect it to PC. There are two devices provided: "MTP"(Media Transfer Protocol, for Windows Media Player 10 use only) and "U-disk".
10. Use USB disk This player has a standard USB function, supports Windows98 (a driver needs to be installed), Windows 2000 and newer (drivers need not to be installed), MacOS X 10.3 or Linux Red Hat 8.0 or newer. This player can be supplied power via USB, and can be played without batteries. From the main menu, choose the work mode you want and enter it. (To enter the main menu from Standby, press Mode.) To connect with PC, plug into USB connector. The player has three display modes: (1).
11. Upgrade player Upgrade this player or service the system firmware with the utility installed on the PC. 1). Enter main menu. 2). Dial Next to choose "system setup". 3). Press Mode to enter "system setup". 4). Dial Next to choose "firmware upgrade". Firmware upgr ade Record Time 5). Press Mode to enter "upgrade USB firmware". 6). Connect player to PC. F/W UPGRAD 7 ) . Run the upgrade tool "MP3 Player Update" on the computer, click the button called "Choose new edition of firmware file". 8 ) .
Upgrades for firmware are for improvement and optimization of the performance of the player. It could impact normal operation if you fail to upgrade firmware. Upgrading the firmware could cause the player to function incorrectly if not done properly. Please read the instructions before you begin. This operation is meant for people who have some computer experience. Upgrade software for the player is not suited for other series of players. 12.
● Play mode (play submenu) You can choose different play modes while playing music or record files. R Play Random Play the music in current folder at random 1 Repeat One Repeat to play one single music file A Repeat All Repeat to play all music in current folder D Play Directory Play all the music in current folder Browse and play, Intro Play ten seconds of songs in the current folder Pre ● Play speed (Play submenu) You can choose different play speeds for MP3 files and record files. 1).
Attention: The speed setting will apply to all songs until changed. ● Reread mode (Play submenu) Enter by pressing "REC/A-B" directly or from submenu. A-B reread 1). Play music or record. 1 01: 13 01 2). Press Mode to enter submenu. Jay - Sky.mp3 3). Dial Next to choose "Reread mode". 4). Press Mode to enter "reread mode": A 1 01 01: 13 Jay - Sky.mp3 5). Dial Next to confirm starting point A. A B 1 01 01: 13 Jay - Sky.mp3 6).
3). It begins to record the voice of user when 4). Play original voice if the time ends and the Reread icon changes to follow-read icon , icon changes to , dial next to enter this function length is the same as the time of the A-B reread at this time. A B Return to "A-B reread" by dialing Last under this mode. Contrast function (play mode not have this function) 1). The reread icon displays as after entering 2). Icon changes to after playing original sound. this function. It plays original sound.
13. Impor tant recommendation Function of "Dream space" In the past, MP3 users who wanted others to see his individual data could only delete their privacy settings while friends borrowed his MP3. Now, the function of "dream space" solves that problem. Using the included utilities, users can separate the disk into two partitions with optional proportions. Two drives will show up on the computer (Windows 2K needs SP4, or you will find one disk only).
Attention: Data in disk will be erased if you separate the disk into two sections, please back up the data on the disk beforehand. Uniting two disks into one disk will also clean out the data. War ning: Do not lose your username and password. You can only erase the encrypted disk by uniting partitions, which will erase the files. 14. Definition WMA Short for Windows Media Audio, WMA is Microsoft's digital music format.
DRM "DRM" Stands for "Digital Rights Management". DRM refers to a collection of systems used to protect the copyrights of electronic media. These include digital music and movies, as well as other data that is stored and transferred digitally. 15. Troubleshooting No power No sound in earphones ☆ Check if the batteries are installed correctly; ☆ Check if the USB connection is solid; ☆ Check if the player has been started.
Unusual situation with the word ☆ displayed onscreen Can not download music normally Can not played the Music files Check whether you have chosen the right language. ☆ Check if the USB line is broken or connected solidly; ☆ Check if the correct driver is installed; ☆ Check if the drive is full or damaged. ☆ Check the digital music format. 16. Technical specification Connection to PC USB2.0 full-speed EMS memory Flash storage: 64MB - 1GB Power supply Record One AAA(No.
MP3, WMA, WMV, ASF Highest output of earphones (L) 10mW+ (R) 10mW (32Ohm) MP3 bit rate 8K bps - 320K bps WMA, WMV, ASF bit rate 5K bps - 384K bps Frequency response 20Hz to 20KHz SNR 85dB Music format MP1, MP2, MP3, WMA, WMV, ASF, WAV Temperature -5 - 40℃ Multi-language show English, French, Italian, German, Spanish, Swedish, Simple Chinese, Trad Chinese, Japanese, Korean, Portugal, Danmark, Dutch Supported operating systems Windows98/SE/ME/2000/XP/2003, Mac OS 10, Linux 2.4.