MA99T | Digital MP3 Player Instruction Manual
FCC CERTIFICATION THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION ISSUBJECT TO THE FOLLOWING TWO CONDITIONS : (1) THIS DEVICES MAY NOTCAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANYINTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSEUNDESIRED OPERATION. NOTE: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules.
Introduction Never use the player in extremely dry environments to avoid static. Thank you for purchasing our MP3 player. Before using the unit please read this manual carefully to obtain the best possible performance from your player. Keep this manual for future reference Never disconnect the player from your PC abruptly during downloading, uploading and formatting to avoid program failures or data loss.
Contents - Play recorded files.......................................................16 7. Transfer recorded files to your PC........................................16 8. How to use the FM radio.......................................................17 9. Telephone book.................................................................... 18 10. System Setup......................................................................20 - How to enter setup.......................................................
com will provide the latest software upgrades and functions ........ • Removable Disk - Manipulate files via the “mobile disk” in “My PC” without any additional programs on your PC (drive program needs to be installed for operating systems prior to WIN2000) • • • “Dream-space” disk mode - Enables you to separate the storage disk via the “mobile disk” in “My PC” into two disks using the utilities included on the accompanying CD and encrypt one of those disks to hide the disk space.
Display screen 2. getting to know the player Appearance and controls 3. basic Functions Start up/shutdown First time, you should dial the Power switch to the ON position - the player will start up automatically. To shutdown player press and hold PLAY or dial the Power switch to the position of Off.
Basic functions (cont.) Basic functions (cont.
Basic functions (cont.) Basic functions (cont.) Adjust volume Decrease volume by pressing VOL-; increase volume by pressing VOL+. NOTE: Please dial the Power switch to the position of ON before you connect the MP3 player to PC, otherwise the battery icon on the player screen will not flicker anytime, so you can’t see the recharge status. PLAY music Press Play or stop (or pause while recording); exit from submenu.
4.
Record mode FM mode
5. playing music Adding and Deleting Files To add or delete music files from your PC or Notebook computer to your MP3 player, simply connect the unit to the USB port of your PC or Notebook computer, click open the “Removable Disk” drive then you can add or delete files. Before you disconnect the player, please follow these steps to avoid possible file loss: 1) Double click the “Safely Remove Hardware icon” in the dialog box. 2) Click stop and the next dialog box appears on the display.
a). Click the MTP device icon use the right button of the mouse, and then select "Format"; b). Waiting for the format processing until finish. 3). Run "WMP10"(Windows Media Player 10), the "MTP" device will be discover Select "Sync", and then open the local folder where your music files saved. 4). Select all music you want to sync to player, and drag them to the"SyncList" on the left side of WMP 10, click "Start Sync" to began download: 5).
Browser "My Computer", you can see the files already downloaded to player. 6). Disconnect the player, it will make ID3 Playlist automatic, this will cost about 8 seconds. 7). Then the player will process DRM licence, it will cost 5~10 seconds.
How to play At first, you must enter into System setup and setup the "DRM Time", set it to current time, otherwise the DRM music can't play accurately. After setup "DRM Time", you can go back to music mode to play and listen to music. Delete file in (stop submenu) mode Files can be deleted under their respective modes: “Delete all” will delete all files of the current mode under the current directory. (For example, only music files will be deleted if you choose Delete All under the music mode). 12 .
Attention: you must eject player from USB if you delete files on PC, or it will tell you “the files are not deleted”.
Display synchronized lyrics (Karaoke function) This player supports “LRC” files. (Search online for “LRC lyrics”, play song and lyrics simultaneously.) • • • How to use lyric files: Keep the names of lyric file and song the same. For example: Name of . ....... song: Jay-Sky.mp3; Name of lyric file: Jay-Sky.
6. Voice recording NOTE: Make sure batteries have enough energy for recording. Ninety-nine recorded files can be saved in every directory. Record mode If “The space is full” displays, there is no more space for new files; delete other files to open more space. If “The directory is full” displays, there are 99 record files in the current directory; delete files or .... switch to another directory.
Playing Recorded Files 7. Transfering recorded Files to pc Files recorded into the player in ACT format can be changed into WAV format with the installation program: 1). Run “Sound Converter”, click “open” 2). Choose the ACT files you want to change 3). Click “Transform” to start transforming to WAV files Besides transforming ACT into WAV, this tool can also play files of WAV and MP3.
8.
9. telephone book First time, the user can find the file ‘Setup_enu_v1.1.exe’ in drive disc CD. Then install this software on the PC as following steps Connect the mp3 with the PC, pressing the start menu to find the Flary Address software: Select the file menu to choose the new, and then you will find the file ‘C:\Program Files\Flary\TelAddbk.
Select the file menu to choose the Input Data to find the file (TelAddbk. dat) in your mp3, and then press the open button. Fill in team name in the blank and press the Append Grouping button: Select the team you added, and then key in the Name and the TEL you want to add. Press the New Card button and you can see the name and Tel No. in the right blank. Add the whole information as the above steps: Press the Save button and Quit. Disconnect the mp3 to PC.
10. system setup This section explains how to set system parameters; each option may change after a firmware upgrade.
Detailed Operating Instructions Set “Record Time” Set Backlight Time 21
Detailed Operating Instructions Set Language Set Power Off See backlight time set instructions for details » Power-save mode shuts unit down automatically if during the set time no keys are . ...... pressed and the player is stopped Set Replay Mode Press Mode to enter interface, Dial to choose: • “Manual mode” denotes that you set a pause manually; • “AUTO mode” denotes that it can pause automatically in replay.
Adjust Contrast See “Backlight time”, operations are the same. Online Mode Operating systems earlier than Windows 2000 Service Pack 4 cannot support two partitions. To display chosen disk after connected to PC, You need to choose which disk you want to use between “single normal disk” and “single cryptographic disk” after use the function of “dream space”. Memory Info The number denotes capacity of disk, percentage denotes the space used. Firmware Version For view the current edition of firmware of player.
11. using the usb disk functions Using the USB disk function: This player has a standard USB function, supports Windows98 (a driver needs to be installed), Windows 2000 and newer (drivers need not to be installed), MacOS X 10.3 or Linux Red Hat 8.0 or newer.This player can be supplied power via USB, and can be played without batteries. From the main menu, choose the work mode you want and enter it. (To enter the main menu from Standby, press Mode.) To connect with PC, plug into USB connector.
12. upgrading the player The system firmware of this player can be upgraded with the utility installed on your PC. 7) Run the upgrade tool “MP3 Player Update” on the computer, click the button called . .. “Choose new edition of firmware file”. 8) Choose new firmware from the CD, or download form the homepage of the factory. 9) Click the “begin upgrade” button to start the upgrade.
Upgrades for firmware are for improvement and optimization of the performance of ... the player. It could impact normal operation if you fail to upgrade firmware. Upgrading the firmware could cause the player to function incorrectly if not done ..... properly. Please read the instructions before you begin. This operation is meant for people who have some computer experience. Upgrade software for this player is not suited for other series of players. 13.
Play mode (play submenu) You can choose different play modes while playing music or record files. Play speed (Play submenu) You can choose different play speeds for MP3 files and record files.
Attention:The speed setting will apply to all songs until changed. Replay mode (Play submenu) Enter by pressing “REC/A-B” directly or from submenu. A-B replay NOTE: Under Replay mode, set “Tempo rate” directly by pressing VOL+ or VOL-.
NOTE: Return to “A-B replay” by dialing Last under this mode. Contrast function (play mode does not have this function) NOTE: Dial Last to go back to “Follow-read function”. Replay times (Play submenu) The replay times determines how many times it should replay A-B before exiting. Replay separation (Play submenu) Replay separation determines the number of seconds between plays. 29 ....
14. important instructions Function of “Dream space” In the past, MP3 users who wanted others to see his individual data could only delete their privacy settings while friends borrowed his MP3. Now, the function of “dream space” solves that problem. Using the included utilities, users can separate the disk into two partitions with optional proportions. Two drives will show up on the computer (Windows 2K needs SP4 or you will find one disk only).
15. definitions WMA Short for Windows Media Audio, WMA is Microsoft’s digital music format. WMA is probably the most widely used format, universally supported by almost every online music service and digital music player (except Apple).WMA comes in both a copy-protected and nonprotected version. MP3 Short for Moving Pictures Experts Group-1, Layer 3, MP3 is still used as general terminology for any type of digital music file.
16. troubleshooting * Check the digital format. Check the DRM time.
Note: “DRM” Stands for “Digital Rights Management”. DRM refers to a collection of systems used to protect the copyrights of electronic media. These include digital music and movies, as well as other data that is stored and transferred digitally. For example, the Apple iTunes Music Store uses a DRM system to limit the number of computers that songs can be played on.
17.
No part of this manual may be copied, republished, reproduced, transmitted or distributed in any way without prior written consent of Nextar, Inc. Any unauthorized distribution of this manual is expressly forbidden. Nextar is a registered trademark of Tofasco, Inc. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice.
