ITEM# MD1008 8” TFT Color Display Flip Down Monitor INSTRUCTION MANUAL
ITEM# MD1008 TABLE OF CONTENTS Thanks from Nextar 2 Important Caution Adjusting Light on LCD 2 Understanding the LCD Control LCD About The Screen of LCD LCD Protection 3 Wiring Diagram 5 Installation 6 Describing the units buttons 7 Remote Control 7 Function Description Changing the Battery Caution 8 Operation Of LCD Turn On/ Off Buttons Function Setup Buttons Key Of Reading Light 9 Specifications 10 1
ITEM# MD1008 APPRECIATION Thank you for purchasing Nextar 4:3 TFT-LCD ceiling monitor. Please read this Manual thoroughly, and retain this document for future reference. IMPORTANT CAUTION 1. Please take note and use all caution terms of this manual. 2. Please do not permit anyone to operate this machine before he/she has reads or knows how the unit operates. 3. Please do not put the LCD in the positions below: A. Any position blocking the sight of the driver. B.
ITEM# MD1008 UNDERSTANDING THE LCD Warning • Please cut off the power right away and go to your local authorized repair service when water or other objects or liquids enter into the machine. If you do not cut the power immediately this may lead to electric shock and/or fire. • Please cut off the power right away and go to your local authorized repair service if smoke or a peculiar burning smell occurs. Failing to do so will lead to system errors. • Please do not remove the back cover of the LCD.
ITEM# MD1008 About the Screen of LCD • Please avoid any direct air from the AC/Heater to the LCD, cool and warm air from AC will affect the inside groupware and wiring which may cause damage. If any of this occurs your screen will become dark or decrease the working life of your screen. • There maybe some little black or white dots, which is the characteristics of LCD screens, this does not mean something is wrong with your unit.
ITEM# MD1008 WIRING DIAGRAM White (L-IN) Red (+12V) Red (R-IN) Black (-) Yellow (AVI) Green (AV2) 5
ITEM# MD1008 INSTALLATION Notice: Please use the components accompanied with this product. Using parts produced by other factories may cause problems. If holes need to be made during installation or any other modifications in the car, always inquire with a professional installer. Please install this product in a position where the driver is completely unaffected from any distraction. Please install this unit in a position where passengers are not affected by sudden stops.
ITEM# MD1008 DESCRIBING THE UNITS BUTTONS 1 2 3 (back) 4 5 6 7 8 1. Open Button 2. Reading Lamps 3. Reading Lamp Switch 4. Display Screen 5. Up 6. Menu 7. Down 8. Power On/off 1 3 5 7 9 2 4 6 8 10 7 1. AV1/AV2 turning 2. Power on/off 3. Brightness Control 4. Brightness Control + 5. Contrast Control 6. Contrast Control + 7. Color Control 8. Color Control + 9. Menu control 10.
ITEM# MD1008 HOW TO CHANGE THE BATTERY Back of Remote Control + Battery Flute Battery Clip 1. Take off battery clip, and draw out battery by the flute. 2. Put new battery in flute with (+) face up. 3. Put battery clip back into the remote. Caution: 1. Improper installation may heat the battery up causing it to burn out or explode. 2. If the battery leaks this may destroy the functions of the Remote Control. 3. Do not open remote control as it may short circuit.
ITEM# MD1008 OPERATION OF LCD Note: Before using, please be sure Audio and Video RCA’s are connected, yellow plug connects with the video signal 1, and green plug connects with video signal 2, white plug link with left audio channel, red plug link with right audio channel. 1. Press “Open” to release the LCD; adjust the viewing angle by pushing it back. 2. Press the Power button to turn the LCD on or off, when the LCD is off the bottom is blue, if on the buttons will illuminate. 3.
ITEM# MD1008 SPECIFICATIONS Display system: Pixel of Display: Definition: Screen Size: Display Region Shadow Light Machine Construction: Working power: Consumption: Working Temperature: Weight: Size: 8 inches (20.5cm) TFT LCD color super clean picture screen display 280000pixel (600x480xRGB) 864000 dots 4:3 163.5(W) x 122(H)mm Operate properly can last for 10000 hours Manual ON-OFF system DC12V 1000mA (usual) 0-60º 1.
