Contents Important Safety Instructions …………………………………..………..2 Accessories ……………………………….…………...6 View of Main Unit ……………………………….…………...7 System Connections ……………………………….……….…..8 Power Supply Preparation …………………………….……….…. . .10 General Setup ……………………………….…………..12 Playing Music ……………………………….…………..16 Photo Viewer ……………………………….…………..19 Use of the Mount Accessories ……………………………….…………..22 Troubleshooting ……………………………….…………..23 Specifications ……………………………….…………..
Important Safety Instructions ， CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Important Safety Instructions NOTES 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with a damp cloth. 7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Important Safety Instructions Warning Failure to avoid the following potentially hazardous situations may result in injury or property damage. The unit is designed to provide you with route suggestions. It does not reflect road closures or road conditions, traffic congestion, weather conditions, or other factors that may affect safety or timing while driving. Use the unit only as a navigational aid.
Important Safety Instructions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) (2) This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with limits for Class B digital device, pursuant to part 15 of the FCC Rules.
Accessories Accessories List ITEM NAME QTY Instruction Manual 2 AC Adaptor 1 Car Adaptor 1 Mounting Bracket 1 USB Cable 1 Magnetic Cradle 1 Stylus 1 Dashboard Mount Disk 1 Pouch 1 NOTE Accessories and their parts numbers are subject to modification without prior notice due to improvements.
View of Main Unit 1. POWER Button Press power button to turn on the unit or exist standby or power off mode. 2. Card Slot Insert the SD card into the slot. 3. RESET Hole Press the reset button with a metal pin to reset the system. 4. LCD Screen 5. Charge Indicator 6. When charging the battery, it is red. When the battery is fully charged, it turns green. Earphone Jack Used to connect earphones for private listening.
System Connections • Always ensure that the unit and any other external device connected to the unit are switched off and unplugged from the power supply before you attempt to connect the unit to any external device. Connecting to PC The unit is designed with a USB port which allows you to connect the unit to a PC for map updating or charging.
System Connections Inserting SD Card The unit is designed with SD Card Slot which allows you to insert a SD card into the unit as shown below: To remove the card, gently press the card in with your fingernail. The card unlocks and protrudes slightly. You can now remove the card. Connecting to Earphones Connect the earphones to the bottom of the unit for private listening. When earphone is connected, the speakers will automatically turn off. Note: Excessively loud volume could damage your hearing.
Power Supply Preparation Using the AC Adaptor The unit is supplied with an AC adaptor for powering and charging its battery. 1. 2. Connect AC adaptor to the USB port, as shown on the right. Plug the two-prong end of the power cord into a grounded electrical outlet. Note: • Turn unit's power off before unplugging. • When using the adaptor, the LCD screen will be brighter than with the rechargeable battery. Using the Car Adaptor The unit is supplied with a Car Adaptor for powering while in a vehicle.
Power Supply Preparation Working conditions and precautions for the rechargeable battery • Battery should only be used and charged when temperatures are between • Maintain well-ventilated conditions around the product to avoid overheating. Don’t • When the battery is weak, an indication menu will appear on the LCD screen and 32°-100°F. put the product on a bed, sofa or anything that may block ventilation to the product. after a little while, the unit will power OFF automatically.
General Setup System Main Menu In the main menu, there are four items for selecting. Touch the corresponding item to enter. Tap to enter the Navigator. Tap to enter the MP3 Player. Tap to enter the Photo Viewer. Tap to enter the Setup menu. Setup Menu In the main menu, tap In the Setup menu, tap to enter the Setup menu, the screen will display as below: to return to the main menu.
General Setup Language Tap in the Setup menu to enter Language setting menu for language selecting, as shown below: Tap the , Then tap buttons to select language. to confirm or tap to cancel. Date & Time Tap in the Setup menu to enter Date & Time setting menu for changing to the current time zone, date and time, as shown below: Tap the buttons to select the proper Time Zone. Tap the buttons of Date group to change the corresponding date.
General Setup Brightness Tap in the Setup menu to enter Backlight setting menu for backlight adjusting, as shown below: Tap , to darken or increase the brightness of the display. After setting, tap to confirm or tap to cancel. Volume Tap in the Setup menu to enter Volume settings menu for volume adjusting, as shown below: Tap the to decrease the volume. Tap the to increase the volume. Then tap to confirm or tap to cancel.
General Setup Align Screen Tap in the Setup menu to align the screen, as shown below. Tap the center of the cross with your finger. When the cross moves to another position, tap and hold the center of the new target. Repeat each time to complete the calibration process. When tapping the screen on the final step, the new settings will be stored and you are returned to the Display menu. Power Tap in the Setup menu to enter Power menu, as shown below: The Power menu displays the unit’s battery status.
Playing Music The unit is designed with SD card slot and supports MP3 and WMA format files playback. You can insert the SD card with MP3 or WMA files in the unit for music enjoyment. Note: Do not store MP3 or WWA format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. Warning: For your own safety, do not use the earphones when driving. Take the following steps to play: Loading MP3 format files: 1.
Playing Music Playing Music Tap Tap in the system main menu to enter the Music Player, as shown below: button to enter the music play list menu, as shown below: When you open the play list, the system will look for audio files on its SD memory card and create a play list automatically. If the play list consists of more than one screen, tap the up arrow for the previous page and the down arrow for the next page.
Playing Music / toggle buttons to determine whether the player will repeat the songs in Tap the play list or not. / Tap randomly. to return to Music Player and tap Tap Tap Tap toggle buttons to determine whether or not to play the songs in the list / to play the music, as shown below. toggle button to pause or resume the playback. to go back to the previous song; tap to skip to the next song. Tap , to decrease or increase the volume of the speaker. to select the desired playback starting point.
Photo Viewer The unit is designed with SD card slot. You can insert the SD card with JPEG files. It supports JPEG format files playback. Note: Do not store JPEG format files in the Flash storage, for the flash storage is used to store map data, any attempt to open the Flash storage may result in the map data missing and lost. It lags when reading high-resolution JPEG files in SD Card. We suggest low-resolution (within 640*480) pictures playback.
Photo Viewer In the folder menu, double tap the memory card icon, and the photos stored in the memory card will be listed on the screen. In the photo list, double tap a photo to play it on the LCD screen. You can also tap a photo to select it and then tap to play it. Tap to return to the previous menu. Tap to enter the Setting menu for setting the Slide Show, as shown below. You can set the slide show on or off to determine whether or not play photos in slide mode.
Photo Viewer When playing photos, the Photo Viewer has following playback features: Tap to go back to the previous photo; tap Tap to rotate the photo. Tap , to switch to the next photo. to zoom the photo in or out. Tap to play the photo in full-screen mode; double tap the screen again to return to Photo Viewer. Tap to return to the photo list.
Use of the Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories (mount bracket, magnetic cradle and dashboard mount disk) to mount the unit in the vehicle. Take the following steps to operate: 1. See Fig. 1. Following the arrow, slide the mount cradle onto the mount bracket to fix it. 2. See Fig. 2. Fix the unit on the magnetic cradle. 3. See Fig. 3. Lift the suction cup lever and then press the suction cup to the windshield.
Troubleshooting Take these steps described in the tables below to solve simple problems before contacting customer service. If you suspect something wrong with this unit, immediately turn the power off and disconnect the power connector from the unit. Never try to repair the unit yourself because it is dangerous to do so. POSSIBLE SOLUTION PROBLEM POSSIBLE CAUSE There is no sound The volume may be turned down. Turn up the volume. There is no picture. The brightness may be turned down.
Specifications TFT screen size 3.
© 2008 Nextar (Hong Kong) Limited. Nextar is a trademark and service mark of Nextar (Hong Kong) Limited. All other brand names, trademarks and service marks are property of their owners. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We may reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice. www.nextar.com Or write us at: Nextar Inc. 1661 Fairplex Dr.
