Ma828 Digital Mp3 Player Instruction Manual
Content 1. Operation……………………………………………………………………………………….2 2. Turn the player ON/OFF………………………………………………………………………2 3. Select menu options…………………………………………………………………………..2 4. Music……………………………………………………………………………………………2 5. Voice……………………………………………………………………………………………3 6. Settings…………………………………………………………………………………………3 Equalizer………………………………………………………………………………………4 Play mode……………………………………………………………………………………..4 Contrast………………………………………………………………………………………..5 Backlight……………………………………………………………………………………….
Operation Turn the player ON/OFF Press PLAY button to turn the unit ON. Press and hold PLAY button to turn the unit OFF. Warning: Do not turn the unit OFF while you are downloading music to the device. Doing so can result in the loss of any unsaved data. Select Menu Options 1. Press PLAY to turn the unit ON and enter music standby mode. 2. Press and hold MODE to enter main menu. 3. Press PREV or NEXT to navigate to the desired menu: Music, Voice, Record, Settings, Delete, About (Memory status) and Exit. 4.
NEXT to select a new track and then PLAY to begin playing the new song. Voice Recording 1. Press MODE for two seconds to enter main menu. 2. Press PREV or NEXT until display reads Record. Press MODE to confirm. 3. Press PLAY to start recording. 4. Press PLAY to pause recording. 5. Press PLAY again to resume recording. 6. Press MODE to stop voice recording during recording or pause. Playing back recorded voice file 1. Press MODE for 2 seconds to enter main menu. 2.
2. 3. 4. 5. Press PREV or NEXT until the screen reads Settings. Press MODE to confirm. Press NEXT or PREV to navigate to the various submenus (see below). Press MODE to enter the desired submenu. Equalizer 1. Once in the Setting mode, press PREV or NEXT until you reach EQ. 2. Press MODE to access Equalizer mode options. 3. Press PREV or NEXT to select an Equalizer mode: Normal, Full Bass, Rock, Jazz, Classical, or Pop. 4. Press MODE to confirm your selection. 6. Press PREV or NEXT to get to Exit. 7.
8. Press MODE to return to the Playback mode. Contrast 1. Once in the Setting mode, press PREV or NEXT until you reach the Contrast settings. 2. Press MODE to access Contrast options. 3. Press PREV or NEXT to adjust LCD contrast. 4. Press MODE to confirm your setting. 5. Press PREV or NEXT to get to Exit. 6. Press MODE to return to the Settings selections. 7. Press PREV or NEXT to get to Exit. 8. Press MODE to return to the Playback mode. Backlight 1.
Power Save (auto power off) 1. 2. 3. 4. 5. 6. 7. 8. Once in the Setting mode, press PREV or NEXT until you reach Pwr Save. Press MODE to access Power Save options. Press PREV or NEXT to select desired time of auto power-off: disable, 2 mins., 5 mins., or 10 mins. Press MODE to confirm your selection. Press PREV or NEXT to get to Exit. Press MODE to return to the Settings selections. Press PREV or NEXT to get to Exit. Press MODE to return to the Playback mode. Record set 1.
Language 1. Once in the Setting mode, press PREV or NEXT until you reach Language. 2. Press MODE to access display Language options. 3. Press PREV or NEXT to select to select your desired language – English, Polish, German or Chinese. 4. Press MODE to confirm. 5. Press PREV or NEXT to get to Exit. 6. Press MODE to return to the Settings selections. 7. Press PREV or NEXT to get to Exit. 8. Press MODE to return to the Playback mode.
6. Screen will read Are you sure you want to delete the file? Press NEXT to advance to the next screen. This will display the song title. 7. Press PREV or NEXT to advance to the next screen. Then press PREV or NEXT to select Yes or No. 8. Press MODE to confirm your selection. 9. Press PREV or NEXT to select the music file you want to delete. 10. Once you have deleted the desired file(s), press MODE for 2 seconds to return to the Play mode. Note: “Read-only” music files cannot be deleted.
Note: 1. The lyric file format should be in the .LRC format. 2. The lyric file name should be same as the song’s name. For example: Song name: Jay-Sky.mp3 Lyric file name: Jay-Sky.lrc 3. The lyric file should be saved in the same folder as the song. More Information Trouble Shooting Symptom Press PLAY but no display. No sound. Cause 1. Battery is out of power. 1. Low volume or no music files stored on the device. 2. Battery is out of power. 3. MP3/WMA/WAV music file is damaged. -9- Solutions 1.
Cannot play MP3/WMA file created by user Files that do not play may be damaged (see above), or might be in a non-standard format. This player can only support standard compressed format. Please don’t download non-standard MP3 music especially Layer-1 or Layer –2 files. Re-download or create a standard MP3/WMA file version of the file. Technical Specification Bit rate: 8~320 Kbps SN R: >80(1KHz) Output power:<5 Mw *2 USB port: USB 2.