Table of Contents Overview of your Digital Photo Display………………………………………………………… 1 Feature………………………………………………………………………………………………2 Accessory………………………………………………………………………………………… 3 Key Function……………………………………………………………………………………… 3 Operation………………………………………………………………………………………… 4 Set the Clock……………………………………………………………………………………… 8 Set the Alarm……………………………………………………………………………………… 8 Background light………………………………………………………………………………… 8 Select the Temperature Format………………………………………………………………… 8 Specifications……………………………………………………
LCD Travel Alarm Clock And Digital Photo Display Please read carefully before using this equipment. Thank you for purchasing this portable digital photo display. It can be used to store 60 photos. It is quick and easy to download pictures into your photo display. You may view your favorite pictures stored in this photo display anytime, anywhere.
LCD Display -2-
Feature 1. Photo display: JPG,BMP 2. Manual or Auto play mode 3. Time & Date Display 4. Clock & Hourly Call 5. Temperature Display 6. Background light Accessory 1. Photo Viewer *1 2. 5Pin Mini USB Cable *1 3. Driver CD *1 4. User Manual *1 5. AAA Battery *2 6. 3V (CR2032) battery *1 7.
Decrease/Background light Power ON/OFF Time Setup Temp Setup Operation: 1. Install 2 AAA batteries into the unit. The unit will then start automatically and switch to or to select your favorite picture. slide-show mode. Then you can press Press , to go to the main menu, shown below: or to POWER OFF and press to confirm.Press and hold 1) To turn off, press for 3 seconds to turn on the until. Remark: To prevent the waste of battery power, the unit is off automatically at 120 seconds by default.
· Press or to Auto Slide and press to set up the slideshow interval (the default interval time is 10 seconds, but you can select from 0~120 seconds): ·Press or to Manual Slide and press to confirm. The device will switch into manual slide mode. Then you can press or to view the pictures. or to Clock Set and press to confirm. 4) To set the clock, press Press or to set up the date and time. Press -5- to confirm at each step.
or to select Clock Disp, then press 5) Press into clock setup shown below: ·Press or 6) Press or shown below: to confirm.
·Press below: or to select Auto ON, and the device will enter into the time setup shown ·Press function. or to select Auto OFF, then press . The device will deactivate the auto off 7) Press or to select Exit, then press to confirm. The device will exit the setup mode. (Note: if you stop pressing buttons for more than 60 seconds while in the setup mode, the photo viewer will switch into photo viewing mode automatically.) 2.
3. Set the Clock Set the Time: 1. Press and hold for 3 seconds until the hour digits flash. 2. Press to set the hour. to confirm. The minute digits flash. 3. Press 4. Press to set the minute. 5. Press to confirm. The year digits flash. 6. Press to set the year. 7. press to fonfirm,The month digits flash. 8. Press to set the month. to confirm. The date digits flash. 9. Press 10. Press to set the date. to confirm. 11. Press to view the date and month at standby mode. Note: You can Press 4．Set the Alarm 1.
6．Select the Temperature Format to display the temperature in°C or °F. 1. Press 2. Press to confirm. Specifications Picture Formats Picture resolution LCD Memory Device Memory Capacity Slide Mode Automatic Energy Saving Transmission Interface Power Supply BMP,JPG,PNG,GIF,TIF 128*128 dots 1.5”TFT Built-in 8Mbit flash 60 photo Yes 120s USB Interface Ver.1.
Test Period (Temperature) Back Light Power Supply 10 seconds 5 seconds 3V(CR2032) Replace Battery for Thermometer Your clock and thermometer comes with one CR2032 battery. If it does not work, please take the following steps to replace the battery. 1. Open the battery cover with a coin. 2. Remove old battery and install the new battery correctly into the compartment. 3. Replace the battery cover. 4. Software installation Please copy the software to your PC. (Note: this software does not need to install.
5. Picture Download After you copy the software to your PC， connect the photo viewer to your PC, and the following dialogue appears: or to select USB Charge and press to confirm, or don’t press any buttons Press for 60 seconds. The device will enter into USB charge mode. During this time, you cannot download photos into the photo viewer, but you can operate the unit. or to select USB update and press to confirm. The computer will search Press the hardware automatically, then run the software “PhotoViewer.
Select photos from your PC and click to add the selected photo into the right panel: - 12 -
- 13 -
You can edit the selected photo by clicking or to rotate, and photo. Click to delete the selected photos from the right panel.
- 15 -
When the download is finished the following message will appear: “Photo Viewer data synchronize complete”. Click OK to finish. (Please connect the PC when you download pictures. If you have open windows, close them before connecting your PC.
