TABLE OF CONTENTS Safety precautions................................................................................................................................... 2 Introduction.............................................................................................................................................. 2 1. Features......................................................................................................................................... 4 2. Packaging Check List...........
Safety precautions 1) Use only the supplied Input 100-240V, Output 5V adapter. 2) Turn off power before cleaning. Use only a soft cloth to clean the unit. Do not use liquid cleaners. 3) Avoid exposing the unit to extreme heat. 4) Disassembling the Digital Photo Frame may result in electric shock and will void your warranty. Introduction Your new Digital Photo Frame is a convenient and innovative way to display your digital photos.
1. Features ● Shows sharp photos on a 3.5 inch LCD display ● Supports SD, MMC MS memory card formats ● Displays photos from memory cards ● Renders in a smooth and clear resolution of 320X240 pixels ● Offers a variety of display features, including a slide show mode 2.
3. Product Diagram A. Top View B. Front View F A. MODE: Press once to start slide show. Press and hold to turn off the screen. B. DOWN: Moves the cursor down C. UP: Moves the cursor up. D. ESC: Return to the previous screen. E. ENTER: Confirm selection/rotate/zoom F.
3. Product Diagram C. Side View D. Bottom View G. USB Port: Connects to a computer through a USB cable or to an electronic socket through the power adaptor H. Magnetic Stand: This adjustable arm supports the unit on a table top or other flat surface. I. Memory Card Slot: Used for inserting an SD/MMC/MS card.
Using Your Digital Photo Frame View photos from memory cards Step 1: Install the magnetic stand for tabletop display or prepare a mount on the wall. Step 2: Power on the unit by either: 1: Connecting it to an electronic socket through the provided power adapter. 2: Connecting it to a computer through the provided USB cable. Step 3: Insert a memory card into the card slot at the bottom of the unit (with the card’ s electrical contacts facing the front of the unit.).
Using Your Digital Photo Frame Press the UP and DOWN buttons to display the Previous/Next photo. Press and hold the ENTER button to rotate the photo 90°counter-clockwise. Press the ENTER button once to zoom. When the photo is zoomed in, you can roam on the photo by pressing the UP, DOWN, MODE, and ESC button. Press the ESC button to return to thumbnail mode. Press and hold the MODE button to enter power saving mode with the screen off. Technical Notes 1.
Question/Trouble-shooting Guide This chapter presents some suggestions to trouble-shoot any problems you may encounter while using the unit. Even if the following guide fails to solve your problem, please do not disassemble the unit; just refer the problem to our professional staff. Please see below for contact details. 1.
Specifications Panel Size 3.5 inches TFT Resolution 320 x 240 File Format Type JPEG Max. Photo Size 16 megapixels Power Requirement 5V DC Operating Temperature -10~55。 C，14~131。 F Storage Temperature F -20~55。 C，-4~131。 This manual was correct and complete at the time of printing. However, specifications and updates can occur at any time without prior notice.
FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with limits for Class B digital devices, pursuant to part 15 of the FCC Rules.
Nextar™ is a trademark of Nextar (Hong Kong) Limited. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice. All screen shots shown are simulated and may not represent the actual screen on production units sold to consumers. For instruction manuals, updated drivers or other information, be sure to visit our website at: www.nextar.
