Car Stereo System User Manual

Wiring Connections

Make sure that you have a good chassis ground. Good

ground connections will eliminate most electrical noise

problems. A good chassis ground requires a tight connec-

tion to the vehicle's metal chassis. The area around the

ground connection should be clean, bare metal without rust,

paint, plastic, dust, or dirt for a good electrical connection.

Speaker Wiring Notes

Follow the above wiring dia-

gram to install the head unit

with new or existing speakers.

• This unit is designed for use

with four (4) speakers with an

impedance between 4 Ohms

to 8 Ohms.

• An impedance load of less

than 4 Ohms could damage

the unit.

• Never bridge or combine the

speaker wire outputs. When

not using four speakers, use

electrical tape to tape the

ends of the unused speaker

outputs to prevent a short

circuit.

• Never ground the negative

speaker terminals to chassis

ground.