※ Voice dialing (if supported by cell phone) ※ Last call redialing ※ Automatic reconnection ※ Volume control and mute function ※ DSP technology for noise reduction and echo cancellation ※ Call transfer between cell phone and NXBT-001 during conversation ※ Bluetooth audio streaming (A2DP and AVRCP) ※ Supports up to 8 Bluetooth devices in pairing memory ※ Can be charged with a 12 volt adaptor or with the built-in solar panel.
1 4 2 5 3 1 Multifunction button: Pairing, Answer/End/Reject Call, Voice Dialing, Last Number Redialing, 2 Volume Up Transferring Call, Playing Forward 3 A2DP 4 Volume Down Mute Playing Back 5 LED Indicator Front USB jack Mic Metal Sheet Solar Module Back
It is recommended that the hands-free car kit be positioned and installed on the windshield in front of the driver's shoulder, as shown in the picture below. Step 1: Stick the Windshield Mount to the windshield Step 2: Insert the bluetooth car kit Step 3: OK WARNING: Install the Hands-free Car Kit out of the way of any Air Bags for safety reason CHARGING THE NXBT-001 Using the car charger Please charge the NXBT-001 before its first use. When charging, a red LED will be displayed.
Warning: Do not attempt to charge the hands-free car kit with any charger other than the one provided. Using another charger may damage or destroy the handsfree car kit. Low battery indicator When the battery is less than 3.5V, the device will make a sound and a red LED will flash thrice every 30 seconds. TURNING THE NXBT-001 ON Press and hold the button for 3 seconds to turn the NXBT-001 on. You will hear an audio cue of "Do Re Mi Fa".
MAKING A PHONE CALL Dialing with the cell phone With the NXBT-001 on and paired with your cell phone, dial your cell phone as you would normally. Voice Dialing With the NXBT-001 on and paired with your cell phone, press the once. After you hear the audio signal, state the desired name. Note: Your cell phone must support Voice Dialing. button Last Call Redialing With the NXBT-001 on and paired with your cell phone, press and hold the button for 2 seconds, the last dialed number will be redialed.
MUTE To activate the mute function, press and hold the button for 2 seconds during a phone call. This will mute your voice to the other party. To release the mute function, press and hold the again. button for 2 seconds Audio Player If you are using a phone that supports A2DP and your phone is already connected with the NXBT-001, you can use the NXBT-001 to play the music stored in your cell phone. PLAY, PAUSE AND RESUME Use the button to play, pause and resume your music.
SUMMARY OF BUTTON FUNCTIONS Functions Status Power on Power off Action Press the button for 3s Power off Power on Press the button for 5s button for 5s Pairing Power off Press the Voice dialing Idle Briefly press the button Answering a call Ringing Briefly press the button Ending a call Talking Briefly press the Rejecting a call Ringing Press the button button for 2s Last number redialing Idle Press the button for 2s Transferring a call Talking Press the button for 2s Mut
SPECIFICATIONS Specifications Bluetooth Core Specification: .......................................V2.0+EDR Supported Profile: .........................................................HSP, HFP, A2DP,AVRCP Frequency Range: ........................................................2.402GHz-2.480GHz Working Range: ............................................................≤33ft /10m Charging Time: ..............................................................car charger: 2 hours ................................
Nextar TM is a trademark of Nextar (Hong Kong) Limited. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice. All screen shots shown are simulated and may not represent the actual screen on production units sold to consumers. For instruction manuals, updated drivers or other information, be sure to visit our website at: www.nextar.