Impor tant Safety Instruction CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USE-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the users to the presence of uninsulated" dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
Impor tant Safety Instruction Impor tant Safety Instr uction NOTES 1) Read these instructions 2) Keep these instructions 3) Heed all warnings 4) Follow all instructions 5)Do not use this apparatus near water 6) Clean only with a damp cloth 7) Do not block any of the ventilation opening. Install in accordance with the manufacture's instructions. 8) Do not install near any heat sources such as radiators. Stoves, or other apparatus (including amplifies)that produce heat.
Accessories CONTENTS Accessories list Chapter I Preparation for use 1.1 Introductions to appearance and buttons Owner' s Manual 2 1.2 Charge 1.3 ON/OFF 1.4 Use of touch pen Car Adaptor 1.5 Communication with computer 1 Chapter II Introduction to use 2.1 Introduction for main interface and main functions Mounting Bracket 1 2.2 Maintain S3 navigation device Chapter III USB Cable 1 Touch Pen 1 Audio Player 3.1 Function and Features 3.
Chapter Ⅰ Chapter Ⅰ Chapter I Preparing the S3 for Use This chapter guides you to get the S3 started, and also describes the basic operations of the navigation device. 1.1.3 Left-side appearance and buttons 【Description】 Power Socket: DC port is connected with the charge power supply; used when charging the navigation device 1.1 Introduction to appearance and buttons 1.1.1 Front appearance and buttons: ON/OFF button SD card slot Earphone Socket Power Socket USB Socket 【D e s c r i p t i o n】 1.
Chapter Ⅰ Chapter Ⅰ 【 Note】 The device has a built-in, irreplaceable lithium battery. To avoid the risk of fire or burning, please do not open, perforate, hit the battery or discard it in fire or water. The battery will burst, blast or release dangerous chemicals. When the charge indicator switches on (blue light), it indicates that the navigation device is in a charging state. Charging requires a few hours, please be patient and do not cut off power until the blue light is off.
Chapter Ⅱ Basic Operations Chapter Ⅰ programs and switches into the computer communication interface; 4. After communication is completed, remove the MINI USB cable. The GPS navigation device continues to run the suspended programs. 【 Note】 Data Security: Please backup system data into external storage devices before upgrading system data. Our company shall not be held responsible for system data damage or loss.
Chapter Ⅲ Using the Audio Player Chapter Ⅱ Basic Operations 【 Note】 Accidental damage is excluded from the scope of the maintenance contract. This chapter explains how to play your favorite music using S3 audio player, and transform it into your portable MP3. Avoid using the device in the following environments: Rapid temperature change, high temperatures（ over 60°） , low temperatures （ below 0°） , high 3.1 Functions and features pressure, dusty locations, static-prone locations, damp places.
Chapter Ⅲ Using the Audio Player Chapter Ⅲ Using the Audio Player The table below explains the functions of each icon in the above screen. PLAY Indicates that the song has been suspended/stopped .Click to continue playing. STOP Click to stop song playing Play next song NEXT PROGRESS TIME Interface of audio folder: The screen below shows the Audio folder interface Play previous song PREVIOUS VOLUME 3.2.
Chapter Ⅳ Setting Chapter Ⅳ Setting This chapter explains the steps to be carried out to setup the device for operation. Click the “Settings” icon to enter the “Settings” menu and set up the system. The setup function includes: “Calibrate Setup”, “Power Setup”, “Backlight Setup”, “Date And Time Setup”, “Language Setup” And “Volume Setup”. 4.1 Volume setup Tap in the setting menu to enter Volume settings menu for volume adjusting, as shown below. Tap or tap buttons to adjust the volume.
Chapter Ⅳ Setting Chapter Ⅳ Setting 4.3 Backlight setup Tap 4.5 Language selection in the setting menu to enter Brightness for backlight adjusting, as shown below. Tap in the setting menu to enter languages setting menu for language selecting, as below shown L ENGLISH Tap to adjust the backlight level. After setting up, tap √ to confirm or tap × to cancel. to select the languages.Then tap √ to confirm or Tap 4.
Chapter Ⅵ Chapter Ⅴ Use of Mount Accessories When using the unit in vehicle, you can use the supplied mount accessories to mount the unit in the vehicle. Chapter Ⅵ Specification TFT Screen size 3.
© 2008 Nextar (Hong Kong) Limited. Nextar is a trademark and service mark of Nextar (Hong Kong) Limited. All other brand names, trademarks and service marks are property of their owners. Nextar may find it necessary to modify, amend or otherwise change or update this manual. We may reserve the right to do this at any time, without any prior notice. All specifications and features are subject to change without notice. www.nextar.com Or write us at: Nextar Inc. 1661 Fairplex Dr.
