Instruction Manual
INTRODUCTION TO USING AN IN-CAR CAM The iN-CAR CAM range of Dash Cams have been designed specifically with ease of use in mind, it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Basic operation. The Dash Cam is set to record video, in files of just 3 minutes in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
TABLE OF CONTENTS INTRODUCTION TO USING AN IN-CAR CAM ............................................................. 03 TABLE OF CONTENTS ................................................................................................. 04 PRECAUTIONS ............................................................................................................. 05 CAUTIONS ON USING THIS PRODUCT ...................................................................... 05 PRODUCT SPECIFICATION ......................
PRECAUTIONS Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing so may result in the risk of electric shock or fire. CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
PRODUCT SPECIFICATION Model Number / Name NBDVR412GW / NEXTBASE iN-CAR CAM PROFESSIONAL Power Requirements 5V / 1.5A Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm / 2A Output: 5Vdc Sensor Resolution 4M Pixel (4,085,760 Pixel) Lens Type / Angle / Aperture 6G / 140° / F1.6 Recording Resolution 2560 x 1440 @ 30fps (default) Screen Size 3.
PACKAGE CONTENTS Please check the contents of your iN-CAR CAM product. iN-CAR CAM Powered GPS Mount Car Power Cable USB Cable (adhesive mount included) Window Sticker Quick Start Guide Instruction Manual & Software Disk Product appearance may differ slightly to that shown above. PRODUCT FEATURES Thank you for purchasing this NEXTBASE iN-CAR CAM product, in this section we will outline some of the features available with this dash cam. 3.
POWERED GPS MOUNT Please see below to identify the parts of the supplied powered mount. 5 1 4 2 3 1. Locking lever The locking lever is used to attach and release the window mount to your vehicles windscreen. Pull the lever down to prepare the window mount for use. Once the mount is firmly upon the windscreen (in a suitable location) push the lever to lock the mount in place. 2. Locking ring Loosen the locking ring to adjust the iN-CAR CAM position if required, remembering to re-tighten before use.
CAMERA - PARTS & CONTROLS Please see below to identify the parts and controls of your iN-CAR CAM. Front: 1 2 3 1. Mounting point (located under dust cover) After removing the dust cover, attach the supplied powered GPS mount here. 2. Camera lens Wide Angle 140°, 6 Element glass lens for optimum picture quality. 3. Speaker Integral speaker for audio playback directly from the iN-CAR CAM.
CAMERA - PARTS & CONTROLS (CONTD.) Back: 4 12 5 11 6 10 7 8 9 4. Power On / Off Press and hold for 2 seconds to turn on / off the iN-CAR CAM. 5. Up / Microphone Off Up: Press to navigate up within menus and to move to the previous file when in playback mode. Microphone Off: Press to turn off / on the microphone (audio recording), only available whilst in video mode. 6. Down / Screen Off Down: Press to navigate down within menus and to move to the next file when in playback mode.
CAMERA - PARTS & CONTROLS (CONTD.) Continued from previous page. 4 12 5 11 6 10 7 8 9 8. Dual colour LED indicator Red = power on Red flashing = recording Blue = battery charging 9. Screen 3.0' LCD colour screen for the viewing of recorded files on the iN-CAR CAM. 10. Mode Press to change between video, photo or playback modes. 11. Record / OK Record: Press to start or stop a recording when in video mode, or take a photo when in photo mode. OK: Press to confirm selection when in menus. 12.
CAMERA - PARTS & CONTROLS (CONTD.) Top: 13 14 15 13. AV Out socket Used to connect your iN-CAR CAM to a television using an AV Cable (sold separately). 14. Microphone Integral microphone for audio recording. 15. DC-IN & USB socket Connect the supplied car power cable or USB data cable here. Note: - Normally the car power cable is connected to the mount when in use, not directly to this socket. Bottom: 16 16.
CAMERA - PARTS & CONTROLS (CONTD.) Sides: 18 17 17. HD Output Used to connect your iN-CAR CAM to a television using an HD Cable (sold separately). 18. MicroSD Card slot Insert the MicroSD card here, taking care that the gold contacts are facing towards the back of the iN-CAR CAM.
IN VEHICLE INSTALLATION Please follow the instructions below for first-time installation of the iN-CAR CAM. For day to day use simply remove the camera from the mount as required. 1. Insert MicroSD Card Insert a suitable MicroSD card (Class 10 48/Mbps) in to the iN-CAR CAM, taking care that the gold contacts are facing towards the LCD screen side of the iN-CAR CAM. Push the memory card until it clicks into place.
IN VEHICLE INSTALLATION (CONTD.) 3. Attach the mount to the iN-CAR CAM Slide the iN-CAR CAM onto the mount. Once attached magnets within the mount will hold the two parts together. 4. Attach the mount to the windscreen Remove the protective plastic film from the suction cup of the mount. Select a suitable position for the mount and clean the windscreen with a dry / clean cloth to achieve a good contact between the glass and suction cup.
IN VEHICLE INSTALLATION (CONTD.) 5. Connect car power cable Connect the supplied car power cable to DC-IN socket of the mount. Plug the power cable into the 12-24Vdc outlet of your vehicle. 12-24V DC The above diagram is for illustration purposes only. The iN-CAR CAM will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the iN-CAR CAM will power on once the ignition has been turned on.
IN VEHICLE INSTALLATION (CONTD.) Please read and follow the notes below for the safe operation of your iN-CAR CAM within your vehicle. As per the installation instructions, you must install the iN-CAR CAM so it does NOT obstruct the drivers view of the road, preferably on the passenger side of the vehicle and behind the rear view mirror.
FIRST TIME USE To ensure the set up of this Dash Cam is as quick and simple as possible, there is an easy to follow ‘First Time Use’ menu. This menu is used to set your preferred Language, Country (this defines your time zone) and speed units. The menu is available when 1) The Dash Cam is first turned on. 2) There has been a Firmware update applied to the Dash Cam. 3) After the Dash Cams settings have been reset, by using the ‘Defaults Settings’ option within the Setup Menu.
VIDEO MODE The key below explains the various information displayed on the screen when your iN-CAR CAM is in Video mode, some icons will only be displayed once the relevant function has been selected within the Video menu, as described below. 1 2 5 4 3 6 7 2:37 8 14 16:04:37 14/10/2015 13 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 12 10 11 9 Mode: indicates the iN-CAR CAM is in Video mode. Recording: appears on screen when recording is in progress.
VIDEO MODE (CONTD.) Video Menu The Video Menu is accessed by pressing the MENU button whilst in video mode. Video Menu Resolution Exposure Audio Recording Number Plate MENU Back OK Enter The default settings have been carefully selected to allow you to use the iN-CAR CAM without the need to change any settings. However, should you wish to change a setting then please see below.
VIDEO MODE (CONTD.) Continued from previous page. Video Menu Video Length Parking Mode Rotate Display Number PlateStamp Time & Date MENU Back OK Enter 4. Number Plate Enter the registration number for your vehicle, this will then be shown on the video file. 5. Video Length Select the duration of the individual recorded video files. The iN-CAR CAM will continue recording, filling the memory card.
VIDEO MODE (CONTD.) Continued from previous page. Video Menu Speed Stamp GPS Location Stamp Model Number Stamp Number G SensorPlate MENU Back OK Enter 8. Time & Date Stamp Turn On / Off the time and date stamp shown on recorded files. Options: Off and On Default Setting: On 9. Speed Stamp Turn On / Off the Speed Stamp shown on recorded files. Options: On and Off Default Setting: On 10. GPS Location Stamp Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files.
VIDEO MODE (CONTD.) Continued from previous page. Video Menu Speed Stamp GPS Location Stamp Model Number Stamp Number G SensorPlate MENU Back OK Enter 12. G Sensor Turn Off or adjust the sensitivity of the built in G Sensor. The G Sensor detects forces which will automatically protect the current recording in event of a collision. Note: - This does not affect Parking mode sensitivity.
PHOTO MODE Press the MODE button to select Photo mode. The key below explains the information displayed on the screen when your iN-CAR CAM is in Photo mode. 1 2 16:04:37 14/10/2015 6 1. 2. 3. 4. 5. 6. 5 4 3 Mode: indicates the iN-CAR CAM is in Photo mode. Exposure: displays current exposure level setting. Date: current date. Time: current time. Memory Card: indicates whether a memory card is present. Battery: indicates whether iN-CAR CAM is running on battery or external power.
PHOTO MODE (CONTD.) Photo Menu The Photo Menu is accessed by pressing the MENU button whilst in photo mode. Photo Menu Exposure Time & Date Stamp MENU Back OK Enter The default settings have been carefully selected to allow you to use the iN-CAR CAM without the need to change any settings. However, should you wish to change a setting then please see below. Use the up and down buttons to highlight the function that you'd like to change and press the OK button to enter the settings sub-menu.
PLAYBACK MODE Press the MODE button to select Playback mode, the Dash Cam will display the last recorded file. Dependent on the type of file, the on-screen information and playback functions differ. Video Files: 2 3 170419_102024_001_HI 1 9 1:39 4 HH:MM:SS DD/MM/YYYY 5 6 8 7 1. 2. 3. 4. 5. 6. 7. 8. 9. Mode: indicates the Dash Cam is in Playback mode. File type: indicates whether a video or photo file is being viewed. File number: displays current file number.
PLAYBACK MODE Photo Files: 3 1 170419_102024_001 9 HH:MM:SS DD/MM/YYYY 8 7 1. 2. 3. 4. 5. 6. 7. 8. 9. 6 Mode: indicates the iN-CAR CAM is in Playback mode. File type: indicates whether a video or photo file is being viewed. File number: displays current file number. Time: displays the time that the current image was taken. Date: displays the date that the current image was taken. Next: press the down button to move to previous file. Previous: press the up button to move to previous file.
PLAYBACK MODE (CONTD.) Deleting files: Highlight the Delete Files option and press the OK button. Playback Menu Delete Files Protect Files MENU Back OK Enter This will then give you two options: Delete File Delete ALL Files Delete Files Delete Files Delete File Delete File Delete ALL Files Delete ALL Files MENU Back OK Enter MENU Back Once selected, follow the on screen instructions to delete the current file. OK Enter Once selected, follow the on screen instructions to delete all files.
PLAYBACK MODE (CONTD.) Protecting files: Highlight the Protect Files option and press the OK button.
SETUP MENU Setup Menu The Setup Menu is accessed by pressing the MENU button twice. Setup Menu WiFi Format SD Card Time & Date Timezones / DST MENU Back OK Enter The default settings have been carefully selected to allow you to use the Dash Cam without the need to change any settings. However, should you wish to change a setting then please see below. Use the up and down buttons to highlight the function that you'd like to change and press the OK button to enter the settings sub-menu.
SETUP MENU (CONTD.) Continued from previous page. Setup Menu Language Country Speed Units Screen Saver MENU Back 5. OK Enter Language Select preferred language. Options: English, Danish, Dutch, Finnish, French, German, Italian, Norwegian Spanish and Swedish Default Setting: English 6. Country Select your current Country, this will then automatically adjust the Time Zone / DST setting to your Time Zone, i.e. if France is selected the Time Zone will become GMT +1.
SETUP MENU (CONTD.) Continued from previous page. Setup Menu Device Sounds Auto Power Off System Info Default Settings MENU Back OK Enter 9. Device Sounds Turn Off / On the beep sound which is heard when a button is pressed and also mute the startup and shutdown chimes. Options: On and Off Default Setting: On 10. Auto Power Off Adjust the timing of the Auto Power Off function, this can be used to continue recording in event of loss of power within the vehicle.
PC CONNECTION Use the supplied USB cable to connect the Dash Cam directly to your PC via the do NOT connect the USB cable to the Powered Mount. socket, Once connected the Dash Cam will turn on with three options available, as described below. - Mass Storage - Power On - Update Use the UP and DOWN buttons to select required function and press OK to confirm selection. Mass Storage (Windows) When this option is selected, the Dash Cam will function as a card reader for your PC. An extra drive will appear, e.
VIDEO & AUDIO OUTPUT The iN-CAR CAM has two methods for video and audio output: High Definition Output When you connect a compatible High Definition cable (sold separately) between the iN-CAR CAM and your television, the iN-CAR CAM screen will blank. This is normal, as all output is now visible upon your television. All playback functions of the iN-CAR CAM are available whilst using the High Definition output.
TROUBLE SHOOTING PROBLEM SOLUTION Video Image is blurred. Remove the protective lens cover, clean the lens, clean the windscreen! I cannot insert the Micro SD card. Micro SD card are very small and require delicate use. Align the card with the diagram shown upon the iN-CAR CAM and insert the card until you feel a slight spring resistance. You now need to push the card, using your finger nail, until you hear and feel a small latch. Release pressure and the card will stay retained within the device.
TROUBLE SHOOTING (CONTD.) PROBLEM My iN-CAR CAM shuts down by itself after a while. SOLUTION Either the battery has gone flat, or there is no power to the iN-CAR CAM and the Auto Power Off period has been triggered. No power to my iN-CAR CAM, The cigarette power cable is not working. Inspect the fuse in the but it works upon my PC. Car Power plug. Replacement fuse = 2A 32mm type. If the fuse is found to be blown, inspect the power cable for damage which may have caused the fuse blow.
TROUBLE SHOOTING (CONTD.) PROBLEM SOLUTION When I press the MENU button nothing happens. This is normal during recording. Stop the recording before pressing the MENU button. If recording re-starts before you can press MENU, then see the Parking Mode section above. Downloading files from www.nextbase.co.uk using Google Chrome results in a Malicious Software message.
NOTES 38
www.nextbase.co.
