Instruction Manual

VIDEO MODE (CONTD.)

Continued from previous page.

4. Number Plate

Enter the registration number for your vehicle, this will then be shown on the video file.

5. Video Length

Select the duration of the individual recorded video files. The iN-CAR CAM will continue

recording, filling the memory card. When the memory card becomes full, the oldest file will

be automatically deleted to make space for the new recording.

Note:

- Protected files will never be deleted.

Options: 2 Minutes, 3 Minutes and 5 Minutes

Default Setting: 3 Minutes

6. Parking Mode

When Parking Mode has been turned on, the iN-CAR CAM enters standby mode when the

12Vdc supply has been turned OFF (typically removing your ignition key).

The iN-CAR CAM will also enter standby mode if no physical movement is detected for 3

minutes, this is designed to allow use of a permanent 12Vdc supply, i.e hard-wire kit.

Should physical movement of the vehicle be detected, the iN-CAR CAM will power on and

start recording a 2 minute protected video. If no further physical movement is detected then

the iN-CAR CAM will return to standby mode, if physical movement is detected subsequently,

then the camera will continue to record normally, i.e. driving once more.

Options: On and Off

Default Setting: Off

7. Rotate Display

Rotate the display 180°, particularly useful should the iN-CAR CAM be mounted on the

dashboard, the iN-CAR CAM control button functions do not rotate.

Video Menu

Video Length

Parking Mode

Rotate Display

Number Plate

Back

Enter

Time & Date Stamp