Owner's Manual

MyNextbase Connect™
Apple App StoreGoogle Play Store
This page describes the steps required to connect your Dash Cam to the MyNextbase Connect™ App.
For more information about using the App, see page 34 (MyNextbase Connect™).
MyNextbase
Paired Devices
Setup Phone
Paired Devices
MyNextbase Connect
Install MyNextbase Connect
on your phone to begin.
nxtb.se/app
GET IT ON
Google Play
Download on the
App Store
31
MyNextbase
In order for this function to work, you must have MyNextbase Connect™ installed on your smart-phone
(or similar device), have an internet connection, and have Bluetooth turned on.
Within this menu, you will be able to manage
your connected devices. You will be able to
connect and set up new devices (as seen in
your Dash Cam’s First Time Use), and manage
devices which are already connected.
Setup Phone
Install the MyNextbase Connect App from the
Google Play Store or the Apple App Store.
Once installed, select ‘Connect to Dash Cam’
on the app. Once a connection is established,
a confirmation message will appear on both
devices. You may then proceed to use both
your Dash Cam and smartphone as usual.
Your paired device can be viewed on the
‘Paired Devices’ screen.
Paired Devices
This screen shows you which smart-phones
are currently linked to your Dash Cam. Here
you can also unpair devices by pressing the
cross (X) to the right of the device’s name.
29
Bob’s Phone
MyNextbase
Paired Devices
Setup Phone