Owner's Manual

18
The above diagram is for illustration purposes only.
Gently rotate the front bezel to adjust
the filter. Rotate the filter until the windscreen
reflection can no longer be seen on the Dash
Cam display (see below).
Once the reflection can no longer be seen,
operate the Dash Cam normally. Please note; it
may not be possible to fully remove the reflection,
but using the Polarising Filter will noticeably
improve your video quality.
Adjust the Polarising Filter
The most effective way to set up your Polarising Filter (1) is to place a piece of plain white paper (2) on
your dashboard (3) under the rear view mirror. With your camera turned ON you will see the reflection (4)
of the paper in the LCD screen of the Dash Cam. Look at the reflection (4) on the windscreen through the
Dash Cam display (5).
4
2
3
Polarising Filter
The Polarising Filter (highlighted on the Dash Cam, below) is designed to reduced the glare on
your windscreen as seen through the Dash Cam, allowing you to record the road ahead clearly.
In bright sunlight the filter will also enhance the colour and contrast levels to help capture number
plates and other vital details.
Do not place fingers on the glass lens of the filter.
Do not adjust the filter while in control of the vehicle
5
1