Operation Manual

CONNECTING TO THE 8'' X 6'' FRAME
Nextbase @Gallery 15 can match with all standard 8'' X 6'' wooden frames as shown below:
1. Attach the standard 8" X 6" frame to @Gallery 15.
2. Move the frame locking latches to secure @Gallery 15 in place.
3. If the chosen frame does not have its own locking latches, then use the built-in metal frame
connectors on @Gallery 15. Pull out the metal frame connectors as shown below. Attach
to the frame by using the screws supplied.
Slide out both sides
Note: Remote controldoes not work if the sensor is blocked by the frame.
CONNECTING TO THE 10'' X 8'' FRAME BY USING THE FRAME
MOUNT
Your Nextbase @Gallery 15 can match with all standard 10'' X 8'' wooden frames by using the
frame mount included in the accessories:
10 General Introduction