Operation Manual
,
Nextbase @Gallery 15 - User s Guide
DISPLAY SETTINGS
1. Navigate down to Display Settings, and press OK to confirm.
2. Press OK to select Brightness, and use Up /Down to increase /decrease the brightness. A
yellow bar shows the effect on the screen.
3. Press OK again to exit brightness adjustment, and navigate down to Contrast.
4. Press OK again to highlight Contrast, and use Up /Down to increase /decrease the contrast.
A yellow bar shows the effect on the screen.
5. Press OK to exit contrast adjustment, and press ESC to go back to the previous menu.
2008/1/17
02:45
2008/1/17 02:45
Resize Resolution
Change Settings
Change Settings
Brightness
5
Wi-Fi Network
Auto and Manual Receive
Language
Display
Settings
0
Contrast
5
0
Display Settings
DATE AND TIME
A. Set Date And Time
1. Navigate down to Set Date and Time, and press OK to confirm.
2. Use Left/Right to select Auto or Manual. If Auto is selected, the time is automatically matched
with the time zone the user has selected. The data on the auto Set Date and Time could be
affected by internet disconnection. If Manual is selected, users can set date and time by
themselves.
3. Navigate down to Date setting, use Left/Right to highlight year setting, and then use Up/Down
to adjust. Use Left/Right to enter month, and follow the same steps for date. Press OK again
to confirm.
4. Navigate down to Time setting, use Left/Right to highlight hour, and then use Up /Down to
adjust. Use Left/Right to enter minute setting, and follow the same steps for AM /PM setting.
Press OK again to confirm.
5. Navigate down to Display Date and Time. Use Left/Right to select On or Off.
6. Press OK to confirm.
2008/1/1 7
02:45
2008/1/17 02:45
Set
Date
and
Time
Change Settings Change Settings
Set
Date
and
Time
Auto
Manually
Date
nd
Time
Select
Time
zone
Display
Format
Date
nd
Time
Set
Date
And
Time
Date
2008 1 17
Set
Standby
Time
Time
Display
Date
&
Time
4 55 AM
On
Off
OK
Setup 35