Operation Manual

MENUS AND SETTINGS

Each mode (Video, Photo and Playback) has a menu used to access the various options and settings, press the

MENU button on the rear of the device to access the menu, specific to the current mode selected.

Use the UP, DOWN buttons to select chosen option and press the OK button to confirm.

1.1 Resolution

Select recording resolution, this will increase or decrease the quality of the recorded video.

Default Setting:

1.2 Loop Recording

This feature enables continuous recording of your whole journey to be made, but the recording is broken

down in to manageable bite sized chunks. In the event of an incident you will always have the latest video

footage, for play back later and in a manageable file size.

Each bite sized chunk can be set to either 2, 3 or 5 minutes long. Default = 3 mins.

When the SD card becomes full of recordings from your journey, the oldest recording are deleted automatically,

in order to make space for the more recordings (any protected files are however not deleted).

The OFF setting is NOT preferred, as this will result in massive file sizes, which are then unmanageable and

risk being corrupted.

1.3 Motion Detection

Turn On / Off the motion detection function, the device will need to remain powered on and will start a 30

second recording when a change to the viewed scene is detected.

Default Setting: Off

1.4 G Sensor

Turn Off or adjust the sensitivity of the G Sensor, it is the G Sensor that detects forces which will automatically

protect the current recording in event of a collision.

Default Setting: Medium

1.5 Record Audio

Turn On / Off audio recording.

Default Setting: On

1.6 Exposure

Select exposure, used to adjust exposure level for different light conditions.

Default Setting:

1.7 Date & Speed Stamp

Turn On / Off the date and speed stamp shown on recorded files.

Default Setting: On

VIDEO MODE

720P (1280 x 720 @ 30Fps)

English