Media Bedienungsanleitung
Nextbase Media 22 – Bedienungsanleitung INHALTSVERZEICHNIS ALLGEMEINE INFORMATIONEN .............................2 Sicherheitshinweise................................ 2 LIEFERUMFANG......................................................3 BEDIENELEMENTE AM GERÄT................................4 Vorderseite und oberes Bedienfeld......... 4 Linke Seite ............................................. 5 Rechte Seite........................................... 5 BEDIENELEMENTE DER FERNBEDIENUNG..............
ALLGEMEINE INFORMATIONEN Wir freuen uns, dass Sie sich für unser Produkt „Nextbase Media 22“ entschieden haben, und wünschen Ihnen viel Freude mit dem Gerät. Bitte informieren Sie sich vor der erstmaligen Nutzung anhand dieser Anleitung über die Bedienung und Konfiguration des Nextbase Media 22. Lesen und befolgen Sie aufmerksam untenstehende Sicherheitshinweise.
Nextbase Media 22 – Bedienungsanleitung LIEFERUMFANG Folgende Komponenten sind im Lieferumfang des Nextbase Media 22 enthalten: Bedienungsanleitung Fernbedienung iPod Anschlussadapter Netzkabel AV-Kabel S-Video-Kabel FM-Antenne Batterien für Fernbedienung Hinweis Das tatsächliche Aussehen der Komponenten kann von den dargestellten Abbildungen abweichen. Prüfen Sie nach dem Öffnen des Kartons den Inhalt auf Vollständigkeit.
BEDIENELEMENTE AM GERÄT Vorderseite und oberes Bedienfeld 1 2 3 4 5 5 6 7 8 9 1 Taste STANDBY Einschalten aus dem Standby-Modus bzw. Wechseln in den Standby-Modus (LED-Anzeige an der Frontseite wechselt zwischen rot und grün). 6 Taste SPRUNG ZURÜCK Wechseln zum vorhergehenden Kapitel/ Musiktitel/Bild usw. Dient in der Menüanzeige zum Navigieren nach unten. 2 Taste WIEDERGABE/PAUSE Starten/Unterbrechen des Abspielens eines Mediums.
Nextbase Media 22 – Bedienungsanleitung Linke Seite EIN-/AUS-Schalter Schaltet das Gerät in den StandbyModus bzw. vollständig aus. EIN/AUS Rechte Seite Schalter DVD-Laufwerk öffnen Schiebeschalter für die Entriegelung der DVD-Laufwerksabdeckung.
BEDIENELEMENTE DER FERNBEDIENUNG 1 Taste EIN/AUS Ein-/Ausschalten des Geräts. 2 Taste STUMM Aus-/Einschalten der Lautsprecher. 3 Taste MODUS Aufruf des Auswahlmenüs für den Abspielmodus. 2 1 MODE MENU 4 3 10 OK 9 SETUP 5 5 Taste SETUP Aufruf des Konfigurationsmenüs für das Nextbase Media 22. 6 Taste RETURN Rückkehr zum vorherigen Eingabeschritt. 7 Taste VOL+ Lautstärke erhöhen. 8 Taste VOLLautstärke verringern. 9 Taste OK Bestätigen der getroffenen Auswahl.
Nextbase Media 22 – Bedienungsanleitung 12 VORLAUF Schnelle Wiedergabe vorwärts (nur DVD, USB, Speicherkarte). 22 OSD (On Scren Display) Anzeige von Informationen zum aktuellen Medium (nicht für FM und iPod). 13 WIEDERGABE/PAUSE Starten/Unterbrechen des Abspielens eines Mediums. 23 SUB-TITLE Sprachauswahl für DVD-Untertitel. 14 SPRUNG ZURÜCK Wechseln zum vorhergehenden Kapitel/ Musiktitel/Bild/Radiosender usw. 15 SPRUNG VOR Wechseln zum nächsten Kapitel/Musiktitel/ Bild/Radiosender usw.
ANSCHLÜSSE OBEN UND HINTEN Oberseite Auf der Oberseite des Nextbase Media 22 befindet sich mittig ein Bereich mit folgenden Anschlüssen: 1 2 6 3 5 4 1 Dockingstation für den iPod (siehe Aufsetzen des iPods auf Seite 18) 2 Schutzklappe (zum Anheben im versenkten Zustand kann man mit dem Fingernagel in die Aussparung greifen) 3 USB-Port (siehe USB- und Speicherkarten-Wiedergabe auf Seite 21) 4 analoger Audioausgang AUx1 (siehe Externe Audiowiedergabe auf Seite 23) 5 Einschub für Speicherkarten (siehe USB
Nextbase Media 22 – Bedienungsanleitung Rückseite Auf der Rückseite des Nextbase Media 22 sind folgende Anschlüsse sowie ein Handgriff für den Transport untergebracht: SCART S-VIDEO VIDEO OUT ANTENNA OPTICAL AUDIO IN R AUX 2 L 1 2 3 4 5 6 7 AUDIO OUT R L 8 9 1 Scart-Buchse 2 S-Video-Ausgang 3 analoger Videoausgang (Cinch) 4 Buchse für FM-Antennenkabel 5 Handgriff zum Tragen des Nextbase Media 22 6 digitaler Audioausgang (optisch) 7 analoger Audioeingang AUx2 (Cinch) 8 analoger Audioausgang
INBETRIEBNAHME Anschließen an die Stromversorgung 1 Schließen Sie das Gerät gemäß folgender Abbildung an die Stromversorgung an. Netzanschluss 2 1 Netzkabel zur Steckdose Vorbereiten der Fernbedienung 1 Öffnen Sie den Deckel des Batteriefachs auf der Unterseite der Fernbedienung. 2 Legen Sie drei AAA-Batterien in das Batteriefach. Achten Sie dabei auf die richtige Polung! 3 Schließen Sie das Batteriefach. Die Fernbedienung ist betriebsbereit.
Nextbase Media 22 – Bedienungsanleitung Einschalten des Geräts 1 Betätigen Sie den EIN/AUS-Schalter an der linken Geräteseite. Das Gerät wechselt in den Standby-Modus. Die rote LED in der Frontseite leuchtet auf. 2 Drücken Sie die Taste STANDBY am Bedienfeld des Gerätes oder die EIN-AUS-Taste der Fernbedienung für etwa 1-2 Sekunden. 3 Die rote LED erlischt, die grüne LED an der Frontseite sowie das Display leuchten auf. Das Gerät ist eingeschaltet.
DVD/CD-WIEDERGABE DVD/CD einlegen und wiedergeben Hinweis Überprüfen Sie den Zustand der Disc vor dem Einlegen! Verwenden Sie keine verformten oder anderweitig beschädigten Datenträger! Legen Sie einseitige DVDs und CDs mit der bedruckten Seite nach oben ein. Bei doppelseitigen DVDs überprüfen Sie zunächst beide Seiten und setzen Sie die Disc dann vorsichtig in das Laufwerk, bis ein Klicken zu hören ist.
Nextbase Media 22 – Bedienungsanleitung Wiedergabe unterbrechen/fortsetzen 1 Zum Unterbrechen der Wiedergabe mit Standbild drücken Sie einmal eine der Tasten WIEDERGABE/ PAUSE . 2 Zum Unterbrechen der Wiedergabe ohne Standbild (Prestop) drücken Sie einmal eine der Tasten STOP . 3 Zum Fortsetzen der Wiedergabe drücken Sie erneut eine der Tasten WIEDERGABE/PAUSE .
Wiederholfunktion (Kapitel/Titel) 1 Drücken Sie während der Wiedergabe einmal die Taste REPEAT. Die Meldung WIEDER [ AUS ] erscheint. 2 Fortwährendes Drücken der Taste REPEAT führt zur Wiederholung des Kapitels (Meldung WIEDER [KAPITEL] erscheint) bzw. Titels (Meldung WIEDER [ TITEL ] erscheint). 1 2 3 4 5 6 7 8 10+ 0 9 T Mit dieser Funktion können Sie ein Kapitel bzw. einen Musiktitel für die wiederholte Wiedergabe festlegen.
Nextbase Media 22 – Bedienungsanleitung 1 Durch Drücken der Taste AUDIO während der Wiedergabe können Sie – je nach Ausstattung der DVD/CD – zwischen den verschiedenen angebotenen Tonspuren wählen. AUDIO 1 2 3 4 5 6 7 8 10+ 0 9 T Wechsel der Tonwiedergabesprache FM/SCAN SLEEP OSD A-B SUB-TITLE AUDIO TITLE SEARCH PHOTO ON MUSIC VIDEO Informationen über die Disc abrufen 1 Drücken Sie die Taste OSD während der Wiedergabe.
Wiedergabe von Audiotiteln, Bildern und Videos von Daten-CDs Nach dem Einlegen einer Disc, die Audio-, Bild- und/oder Video-Dateien enthält, wird im Display die Ordnerstruktur der CD angezeigt. In der Titelleiste befinden sich Icons für den Dateityp. Audio Bild Video [Album20] 005.Winter.mp3 Ordner Album20 001.Intro 002.Spring 003.Summer 004.Autumn Dateien 1 Bewegen Sie die Auswahl durch Drücken der Richtungstasten auf ein Icon, ein Ordnersymbol oder einen Dateieintrag.
Nextbase Media 22 – Bedienungsanleitung BEDIENUNG DES FM-RADIOS 1 Stecken Sie den Stecker des FM-Antennenkabels in die Buchse ANTENNA auf der Rückseite des Gerätes. 2 Befestigen Sie das offene Ende des FM-Antennenkabels an einer möglichst höhergelegenen Position, um guten Empfang zu gewährleisten. 3 Wählen Sie den FM-Radio-Modus (siehe Auswahl des Wiedergabe-Modus’ auf Seite 11). Sie können den Radioempfang auch direkt durch Drücken der Taste FM/SCAN aktivieren.
iPOD-WIEDERGABE Aufsetzen des iPods 1 Entfernen Sie die Schutzhülle von der iPod-Anschlussbuchse am Nextbase Media 22 (sofern vorhanden). 2 Setzen Sie den iPod unter Nutzung des passenden Adapters auf den Anschluss gemäss nachfolgender Abbildung: Adapter Schlitz für den Fingernagel zum Abheben Connector Zwei Adapter stehen zur Verfügung iPod nano 1, 2, 4 GByte iPod Video 30 GByte 3 Im Display erscheint das Symbol für den iPod-Modus.
Nextbase Media 22 – Bedienungsanleitung Wiedergeben von Dateien MODE MENU 1 Drücken Sie die Taste MENU an der Fernbedienung. Das Hauptmenü des iPod wird im Display angezeigt. OK 2 Bewegen Sie die Auswahl durch Drücken der Richtungstasten AUF/AB auf den gewünschten Eintrag. SETUP RETURN VOL 3 Bestätigen Sie die Auswahl durch Drücken der Taste OK. Die Wiedergabe startet mit der ausgewählten Datei.
2 Drücken Sie die Bluetooth-Pairingtaste auf der Oberseite des Nextbase Media 22 für etwa 4 Sekunden. Die blaue Bluetooth-Status-LED zeigt durch schnelles Blinken (0,5 s EIN/1 s AUS) die Empfangsbereitschaft für alle Geräte mit Bluetooth-A2DP-Funktionalität an. Pairingtaste auf der Oberseite Bluetooth-Modul 3 Geben Sie in Ihr externes Bluetooth-Gerät das Passwort 8888 zur Bestätigung der Verbindung ein. Die erfolgreiche Registrierung wird durch ein Tonsignal bestätigt.
Nextbase Media 22 – Bedienungsanleitung USB- UND SPEICHERKARTEN-WIEDERGABE Einsetzen des Speichermediums 1 Öffnen Sie die Schutzklappe auf der Oberseite des Nextbase Media 22. USB Speicherkarte Schutzklappe 2 Setzen Sie das USB-Speichermedium oder die Speicherkarte in den entsprechenden Port ein. Unterstützt wird USB 1.1 sowie SD/MS/MS-Pro und MMC-Speicherkarten bis max. 1 GByte. 3 Im Display erscheint das Symbol für den jeweiligen Modus. Bestätigen Sie durch Drücken der Taste ENTER.
AUDIOEINGÄNGE Das Nextbase Media 22 verfügt über zwei Stereo-Audioeingänge, über die Sie externe Geräte anschließen und nach Auswahl des entsprechenden Modus’ (siehe Auswahl des WiedergabeModus’ auf Seite 11) mit der Soundqualität des Nextbase Media 22 wiedergeben können. 1 Eingang AUx1 an der Oberseite – Modus AU1 (3,5 mm Klinke). 2 Eingang AUx2 an der Rückseite – Modus AU2 (Cinch, Audio/Video).
Nextbase Media 22 – Bedienungsanleitung VIDEO- UND AUDIOAUSGÄNGE Externe Videowiedergabe Für die Videowiedergabe auf externen Geräten (TV, Beamer o.ä.) stehen auf der Rückseite des Nextbase Media 22 folgende Ausgänge zur Verfügung: 1 Scart-Buchse (CVBS und RGB) 3 1 2 2 Standard S-Video 3 Cinch (Standard CVBS) Hinweis Das Nextbase Media 22 besitzt keinen Videoeingang.
KONFIGURATION DES NEXTBASE MEDIA 22 Aufruf und Verlassen des Menüs Das Nextbase Media 22 verfügt über ein eigenes Konfigurationsmenü, das Sie wie folgt aufrufen: 1 Schalten Sie das Gerät ein und wählen Sie einen Wiedergabemodus. 2 Drücken Sie die Taste SETUP an der Fernbedienung. Das Konfigurationsmenü erscheint im Display.
Nextbase Media 22 – Bedienungsanleitung Systemkonfiguration Dieser Menüpunkt enthält folgende Auswahlmöglichkeiten: TV SYSTEM NTSC Für die Videowiedergabe an einem Fernsehgerät mit dem NTSC-Standard (üblich in den USA, Kanada, Lateinamerika, Taiwan usw.) PAL Für die Videowiedergabe an einem Fernsehgerät mit dem PAL-Standard (üblich in Europa, Australien, China, Singapur usw.) AUTO Für die Videowiedergabe an einem Fernsehgerät, das mehrere Standards unterstützt. Die Voreinstellung ist AUTO.
PASSWORT Das Passwort dient zum Sperren des vorgewählten DVD-Rating (siehe folgenden Menüpunkt). Das Standardpasswort ist 0000. Die Eingabe des richtigen Passwortes wird durch ein geöffnetes Schloss als Symbol angezeigt. Zur erneuten Sperrung können Sie auch eine beliebige andere vierstellige Zahl eingeben. Hinweis Falls Sie das Passwort vergessen haben, können Sie das DVD-Rating immer mit 0000 entsperren. DVD-RATING Dieser Menüpunkt dient zur Kontrolle darüber, welche DVDs abgespielt werden dürfen.
Nextbase Media 22 – Bedienungsanleitung Sprachauswahl Folgende Spracheinstellungen sind in diesem Menüpunkt verfügbar: SPRACHAUSWAHL OSD SPRACHE ENGLISH Sprache für die Anzeigen im AUDIO SPRACHE GERMAN Display des Nextbase Media 22: UNTERT SPRACHE SPANISH MENU SPRACHE Möglich sind Englisch, Deutsch, FRENCH ITALIAN Spanisch, Französisch und Italienisch.
Audioausgabe Dieser Menüpunkt dient zur Aktivierung und Konfiguration des digitalen Audioausgangs. AUSGABEMODUS SPDIF/OFF Wählen Sie diese Einstellung, um ein analoges Signal auszugeben. Über den optischen (digitalen) Ausgang wird dann kein Signal ausgegeben. SPDIF/RAW Wählen Sie diese Einstellung, wenn Sie einen Verstärker mit DD-und DTSDecoder über ein optisches Audiokabel angeschlossen haben. Es wird dann das originale Digitalsignal („Bitstream“) über den optischen Ausgang ausgegeben.
Nextbase Media 22 – Bedienungsanleitung FEHLERBESEITIGUNG Nicht jede Störung bedeutet gleich einen Defekt des Gerätes. Folgende Tabelle listet einige mögliche Fehlerursachen und Massnahmen zu ihrer Beseitigung auf. Symptom Nextbase Media 22 DVD/CD Mögliche Ursache Abhilfe Gerät lässt sich nicht einschalten. Gerät ist vom Stromnetz getrennt. Sitz des Netzsteckers prüfen. Andere Steckdose testen. Fernbedienung wirkt nicht. Batterien der Fernbedienung leer. Wirkungslinie der Fernbedienung versperrt.
Symptom iPod iPod lässt sich nicht richtig aufsetzen. Keine Wiedergabe Mögliche Ursache Schutzhülle entfernen. Falscher Adapter. Korrekten Anschlussadapter verwenden (siehe Seite 18). Anschlüsse verschmutzt. Anschlüsse auf beiden Seiten auf Fremdkörper prüfen. iPod nicht eingeschaltet. Kein Musiktitel ausgewählt. iPod einschalten. Titel wählen und Wiedergabe starten (siehe Seite 19). Lautstärke erhöhen. Lautstärke zu gering eingestellt. iPod muss neu aufgesetzt werden.
Nextbase Media 22 – Bedienungsanleitung TECHNISCHE DATEN Leistungsmerkmale - Videowiedergabe und Bedienerführung über 3,5“TFT-Display mit 960x240 Pixeln - integrierter DVD-Player, codefree: spielt DVD/SVCD/VCD/CD/MP3/DivX/DVD±R/DVD±RW/CD-R/ CD-RW/JPEG/MPEG discs - 2.1-Lautsprecher-System mit Subwoofer - FM-Radio (87.
LIZENZEN UND URHEBERRECHT MACROVISION: Dieses Produkt beinhaltet eine Technologie zum Schutz von Urheberrechten, die durch US-Patente und andere geistige Eigentumsrechte geschützt sind. Die Verwendung dieser Urheberrechtsschutztechnologie muss von Macrovision genehmigt werden und dient für den Heimgebrauch und andere eingeschränkte Vorführungen, soweit von Macrovision nicht anders angegeben wurde. Reverse engineering oder Disassemblierung sind nicht gestattet.
www.next-base.