Operation Manual

16
7.
8.
9.
10.
11.
12.
Seat / Screen adjustment thumbwheel
Loosen thumbwheel to increase / decrease the distance between seat and the screen
as required, remembering to re-tighten the thumbwheel before use.
Screen viewing angle adjustment thumbwheel
Loosen this thumbwheel to change the angle of the screen as required, remembering
to re-tighten the thumbwheel before use.
Car mount guide
Once attached to the DVD player / monitor the bracket will slide down into this guide.
Securing clamp thumbwheels
Remove the two thumbwheels to release the rear securing clamp
, place the two clamps
either side of the metal poles (stanchions) that connect the headrest to the car seat.
Re-tighten the two thumbwheels.
Locking tabs
These locking tabs will lock into the player bracket and a click will be heard when the
DVD player / monitor is correctly attached.
Release catch
Push the catch backwards to release the locking tabs, pull DVD player / monitor
upwards to remove from the car mount.
EASY FIT CAR MOUNT & INSTALLATION (CONTD.)
Rear securing clamp
Stanchion
Thumbwheel
Car Mount
10
PUS H
12
9
11
8
7
ENGLISH