User's Manual

11
1
2
3
O
Q
F
G
O GP W
4
5
7
8
9
10
11
LEDs
Top: Blue
- The Blue LED will be on while the Dash Cam is charging. It will turn off when charging is complete,
even if the Dash Cam is still plugged in.
Bottom: Red
- The Red LED is permanently on while the Dash Cam is active. It will flash while recording.
Protect Button
Press whilst recording to protect the current file in event of an emergency situation.
If ‘Device Sounds’ is turned ON, you will hear a chime.
Depending on at which point during the current recording the file is protected, the camera will also
save the previous or subsequent recordings, as follows:-
- If the protection takes place during the first 3rd of the recording, the previous recording will
also be protected.
- If the protection takes place during the final 3rd of a recording, the next recording will also be
protected.
Screen
2 Inch High Resolution Screen.
Record
Video Mode: Press to Start/Stop recording.
Photo Mode: Press to take photo.
In the Menus: Select.
Up/Down Buttons
In the Menus: Use to navigate the menus within the camera.
Video Mode: Down to turn the screen ON/OFF, Up to turn the audio recording ON/OFF.
Playback Mode: Scroll through your videos/photos.
Camera Parts and Controls
See below to identify the parts and controls of your Dash Cam
Dust Cover
Mounting point located under the dust cover.
Speaker
Integrated speaker for audio playback.
Camera Lens
Wide angle 120º.
Power Button
Press and hold for 2 seconds to turn the Dash Cam On/Off.
Menu Button
Press to open the Dash Cam’s menu system.
Mode Button
Press to select video/photo/playback modes.
1
6
2
3
4
5
7
11
8
9
10
6
QM
11
F
=
2
.
0