User's Manual

19
Use the UP and DOWN buttons
to select required function and
press OK to confirm selection.
To ensure the set up of this Dash Cam is as quick and
simple as possible, there is an easy to follow ‘First Time Use’ menu.
This menu is used to set the Language, Time, and Date.
This menu will appear when:
1. The Dash Cam is first turned on.
2. There has been a Firmware Update applied to the
Dash Cam and ‘Keep User Settings’ has been
set to OFF. If It is set to ON, your Dash Cam will start
normally, with your settings intact.
3. After the Dash Cam’s settings have been reset, by using
the ‘Default Settings’ option in the Setup Menu.
Follow the on-screen instruction to select the Language,
Time, and Date.
Note:
- The First Time Use menu is in place to get you up and
running quickly and smoothly. The settings you choose
during First Time Use can be changed at any later time
in the setup menus.
First Time Use
Set Time
00 0000: :
Back Enter
Enter
Set Date Format
DD / MM / YY
Back Enter
Set Date
01 01 2019/ /
Back Enter
Initial Setup Complete
Initial setup is complete.
You can change other settings
if required from within
the menus
Back Enter
Initial Setup Complete
Your Dash Cam is now ready to use.
Please visit www.nextbase.com to
download the instruction manual
and playback software.
Back Enter
Before you can use your Dash Cam, it is essential that it is fully charged. Connect your Dash Cam
via the USB port to a home power source such as a PC or home USB socket for approximately
2 hours.