User's Manual

Use the UP and DOWN buttons

to select required function and

press OK to confirm selection.

To ensure the set up of this Dash Cam is as quick and simple

as possible, there is an easy to follow ‘First Time Use’ menu.

This menu is used to set the Language, Time, and Date.

This menu will appear when:

1. The Dash Cam is first turned on.

2. There has been a Firmware Update applied to the Dash Cam

and ‘Keep User Settings’ has been set to OFF. If It is set to ON,

your Dash Cam will start normally, with your settings intact.

3. After the Dash Cam’s settings have been reset, by using the

‘Default Settings’ option in the Setup Menu.

Follow the on-screen instruction to select the

Language, Time, and Date.

Note:

- The First Time Use menu is in place to get you up and

running quickly and smoothly. The settings you choose

during First Time Use can be changed at any later time

in the setup menus.

First Time Use

Set Time

00 0000: :

Set Date Format

DD / MM / YY

Set Date

01 01 2019/ /

Initial Setup Complete

Initial setup is complete.

You can change other settings

if required from within

the menus

Back Enter

Enter

Back Enter

Before you can use your Dash Cam, it is essential that it is fully charged. Connect your Dash Cam via

the USB port to a home power source such as a PC or home USB socket for approximately 2 hours.

MOD