Operating Instructions

24
Video Codec: MPEG4 ASP, XVID, DIVX3/4/5, H.263,
H.264,VC-1, WMV3
Audio Codec: MP2, MP3, AC3, AAC, PCM, DTS,
AMR-NB, WMA
3GP/MP4
1920*1080pixels/30FPS
Video Codec: H.263,H.264 AVC, MPEG4
Audio Codec：AAC, AMR-NB
RM/RMVB
1280*720pixels/30FPS
Video Codec: Real video 8/9/10/
Audio Codec Cook/AAC
FLV
1920*1080pixels/30FPS
Video Codec: Sorenson H.263, VP8, H.264 AVC
Audio Codec：MP3,PCM, AAC
MOV
1920*1080pixels/30FPS
Video Codec: H.263, H.264 AVC,MPEG4
Audio Codec: AAC
MKV
1920*1080pixels/30FPS
Video Codec: H.264, MPEG4,WMV3
Audio Codec: MP2/MP3/AC3/AAC/PCM
MPG/DAT/VOB
1920*1080pixels/30FPS
Video Codec:MPEG1/2
Audio Codec：MP2/MP3
WMV/ASF
1920*1080pixels/30FPS
Video Codec: WMV3
Audio Codec: WMA2/3
Battery Charge Time About 4 Hours
Battery Life
About 6 hours of music playback;
About 5 hours of video playback;
About 5 hours of web browsing.
Display 7.0-inch TFT LCD, Touchpad (capacitive touch pad), 800X600 pixels.
SNR >=75dB
Frequency Response Range 20Hz—20KHz
Power Supply
Rechargeable lithium-ion polymer battery;
AC Adapter: AC Input 100-240V
～
50/60Hz, DC Output 5V/2A
Storage Temp. -20℃ ～ +65℃
Ambient Temp.
0
℃ ～
+40
℃
Operation Relative Humidity
20%
～
90%
（
40
℃）
Storage Relative Humidity 20% ～ 93%（40℃）
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.