Quick Start Guide

1
Accessories
USB Cable DC Adaptor Pouch
Buttons & Ports
Step by Step to Get Started
STEP 1 Charge the Battery
Plug the DC adaptor to the POWER-IN port of the unit
and the standard 220V power socket to start charging.
It takes about 5 hours to fully charge the battery. The
charge indicator should light up in orange once the
battery is fully charged.
STEP 2 Transfer files
(1) Connect the device to computer with the supplied USB cable.
(2) Two new removable disk drives should appear on your computer standing for the internal
memory of the device and the memory card inside it.
(3) Copy files to the removable disk drive just as you would do to your hard drive.
(4) On your computer, left click the icon at the right bottom corner of the desktop and then
click the pop-up message “Stop the USB Mass Storage Device Drive (X).” to disconnect
the device from the computer safely.
7” Capacitive Touch Android Tablet
Quick Start Guide
NEXT7P12
Ver.1.1
a. VOL- - turn down the volume
b. VOL+ - turn up the volume
c. Power buttonpress and hold to
power on or off the unit; briefly
press to turn on or off the screen.
d. Earphone Port connect to stereo
earphones.
e. Built-in speakers
f. Touch screen
g. Camera lens
h. Micro USB Portconnect to
a computer through USB cable.
i. Charge indicator
j. POWER-IN port - connect to
power supply through DC
adaptor
k. Micro SD card slot
l. Reset pin hole/Built-in
microphonereset your
device if it freezes.

Summary of content (12 pages)