User's Manual

Figure 1. Coverage Unit, back view with mounting holes.
Figure 2. Coverage Unit, bottom view of mounting holes.
Figure 3. Network Unit, back view of mounting holes.
For more information, refer to the Quick Start Guide or visit www.cel-.com CEL-FI PRO SMART SIGNAL BOOSTER
Coverage Unit
Back Mounting Holes
Coverage Unit
Bottom Mounting Holes
Network (Window) Unit
Back Mounting Holes
1
Determine Cel-Fi Device Location (refer to Quick Start Guide)
2
Determine Mounting Hole Locations
3
Drill Anchor Holes (Drywall)
4
Install Anchors (Drywall)
3G/4G/LTE
NetworkUnit
CoverageUnit
In each marked spot, use a 3/16” drill
bit to drill guide holes for the anchors.
5
Install Mounting Bracket