User's Manual

To pair the headset with a device (in OFF state):

1. Hold down the TALK button until the red and green lights

ash repeatedly. Note: The headset is in pairing mode

for 5 minutes. The rst time the INVISIO

Q7 is turned

on it will automatically enter into pairing mode.

2. Use your device’s Bluetooth

menu to search for the

headset. When found, “INVISIO

Q7” appears in the

device’s list.

3. If the device requests a passkey, enter 0000.

To pair the headset with a device (in ON state):

1. Hold VOLUME UP + VOLUME DOWN until the red and

green light are ashing. Then follow step 2 and 3 as

above

Making a Call

When the headset is connected, dial or operate the phone

accordingly to place the call.