Instruction Manual

39 ADVANCED FUNCTIONS
ADVANCED FUNCTIONS
40
2. Self Test
(1) Quick test
Self Test
Select a Method
HDD Smart Test
HDD Full Test
149.0 GB
Select
Back
HDD Smart Test
149.0 GB
Back
It will take several
minutes to test.
Are you Ready?
Ok
HDD Smart Test
149.0 GB
0m52s
Select “Self test” submenu from the “HDD
Management” menu
The User can choose between a quick test or
a full test. Choose the quick test. The quick
test uses a S.M.A.R.T test provided by the
hard drive.
The quick test takes several minutes to test
the internal hard drive. Pressing the control
key initiates the quick test.
The display tells the user that the S.M.A.R.T
test is in progress. This process takes several
minutes
149.0 GB
Cancel
HDD Management
HDD Info
Self Test
TMP Folders
Format
Select
1. Capacity Check
HDD Info
Total: 149.0Gb
Capacity Check
149.0 GB
Select
Back
Used: 37.9 Mb
149.0 GB
Cancel
Capacity Check
Checking
149.0 GB
Preview
Select
Back
HDD Management
Sector Recovery
Buzzer Off
Sync
Language
Firmware Update
Index AutoGen. Off
Select “HDD Management” from the main
menu.
Select “HDD Info” submenu from the “HDD
Management” menu.
The NVS2501 will show the capacity status of
the internal hard drive using a pie diagram.
Select OK by pressing the control key briefly
[S].
The capacity check will then begin.
149.0 GB
Cancel
HDD Management
HDD Info
Self Test
TMP Folders
Format
Select