Instruction Manual

47 ADVANCED FUNCTIONS BURNING A BLU-RAY DISC 48
18. Burning a Blu-ray Disc
1. Connecting the USB Blu-ray Drive
Connect the USB Blu-ray drive to the [eSATA/USB-Host] combo port of the NVS2501
as shown below. The NVS2501 detects the drive and displays information.
A user can connect a USB Blu-ray drive to the NVS2501 through an eSATA/USB
HOST combo port. The NVS2501 supports the burning of Blu-Ray Discs--or the
preview of Blu-ray Discs-- without the use of a computer. Only the BD-R or BD-RE
is supported. There is no support for burning a CD or DVD.
102.3 GB
Cancel
Detected USB
Checking...
149.0 GB
Select
MATSHITABD-MLT
J240AS 1.00
BD Info
If a Blu-ray drive is properly connected, the
NVS2501 will detect it and display the
information as shown in the figure. Press the
control key briefly [S] to go to the next step.
6. Language setting
149.0 GB
Preview
Select
Back
HDD Management
Sector Recovery
Buzzer On
Sync
Language
Firmware Update
Index AutoGen. Off
The user can select the preferred language
using this function.
Select “Language” submenu from the main
menu.
Select the desired Language using the
up/down/left/right key function. Press the key
briefly to set the language as the default.
149.0 GB
Cancel
Language
English
日本語
Français Español
Italiano
Русский
한글
Select
中文
Deutsch