Instruction Manual

49 BURNING BLU-RAY DISC BURNING BLU-RAY DISC 50
2/3
20090701.000
20090630.000
20090601.000
Select
Finish
29.6GB Selected
Select Back
57 Files
29.6GB
6 Video Files
Record
Selected Backups
into BD-RE?
1 Dirs Selected
Burning BD
15/57 448.2MB
102.3 GB
Cancel
0m41s
Comparing Data
17/57 458.2MB
102.3 GB
Cancel
1m34s
The selected folder will be highlighted and a
check mark will be shown at the head of folder
name. A user can select multiple folders at this
stage, but the total capacity of selected folder(s)
should not exceed the capacity of the Blu-ray
Disc.
Press the key more than two seconds to initiate
burning.
Confirm selection.
It will take the Blu-ray Disc about 20 minutes to
prepare for burning.
The progress of the Blu-ray disc burning is shown.
After burning the Blu-ray Disc, the NVS2501 will
verify the data in both the Disc and the hard
drive.
Compiling Data
14/57 428.2MB
102.3 GB
Cancel
0m30s
Select
Cancel
22.5GB
BD-RE
Non-Blank Disc
BD Play
BD Burning
3
1
2
① Capacity of the Blu-ray Disc
② Type of discs
- BD-R (record once)
- BD-RE (rewritable)
③ Disc status
BLANK DISC
NON-BLANK DISC
BD-R BD-RE
Recordable
Non-recordable
Recordable
Recordable
2/3
20090701.000
20090630.000
20090601.000
Select
Finish
Select Folders
149.0 GB
If you select “Burning BD,” the NVS2501 will
show you the burning process. Press the
control key briefly [S] to begin the procedure.
First, select backup folders that you wish to
transfer.
By using the up/down function on the control
key, highlight the folder that you want to
archive. Press briefly to select the folder.
The NVS2501 shows you the video clip stored
in the backup folder, then asks if you wish to
select it. Press the control key briefly to
select the folder for burning --or press the
key more than two seconds to unselect the
folder.
1/6
20090701.000
Select
Back
BD Burning
428.2MB
6 Video Files
Select?
Ok Cancel
2. Burning the Blu-ray Disc
149.0 GB
Select
1. Select Folders
2. Compile Data
3. Initialize BD
4. Copy Data
5.Compare Data
BD Burning