Instruction Manual

53 EXAMPLES OF BASIC FUNTIONS
EXAMPLES OF BASIC FUNTIONS
54
(5) If the copy is successfully completed, the result
will be shown on the LCD. Remove the SxS card
to return to the initial “XCopy ready”mode.
2. Copying a CardBus memory card (including P2/P2E)
Copy Done
Remove SxS
16/16 3.6 GB
98.7 GB
Off
10.7 MB/s
Copy Success
Copying a CardBus memory card
(including P2/P2E) is the same as
copying an SxS card-- except that the
CardBus memory card (including P2/
P2E) requires the CardBus memory card
adapter which is delivered with the
NVS2501. First, connect the CardBus
memory card (including P2/P2E) to the
CardBus memory card adapter, then
insert the card into the Express Card
slot of the NVS2501.
The NVS2501 will display an error
message if an empty CardBus memory
card adapter is inserted.
CardBus
Memory card
(including P2/P2E card)
3. Copying a CF/MD/SDHC/SDXC/MS card
The Memory card slot for a CF/MD/SDHC/SDXC/MS card is located on the top of
the NVS2501. Insert the CF/MD/SDHC/SDXC/MS card into the slot.
The remaining procedure is the same as for SxS memory cards.
145.0 GB
XCopy Ready
Menu Off
CardBus
Memory card
Adapter
CF/MD Card
145.0 GB
XCopy Ready
Menu Off
SDHC/SDXC/MS Card
145.0 GB
XCopy Ready
Menu Off
When copying from a
USB device, the NVS2501
should be powered by the
AC power adapter.
The detailed connection
is shown above.
USB(mini-B)
USB Cable
USB(Standard-A)
Adapter(12V)
105.9 GB
Cancel
Detected USB
Checking...
3.6 GB
16 Files
105.9 GB
Cancel
Select
Copy USB?
Fast Copy
Copy & Verify
Safe Copy
Copying
4/16 20.1GB
105.9 GB
Cancel
0m30s
If the USB device is
connected correctly,
the NVS2501 will
automatically detect
the device and prepare
for Copying
Copying from a USB device:
After copying, remove the
USB cable connected to
the USB device.
4. Copying from an IKEGAMI GFPAK or a USB memory card reader
The NVS2501 supports copying from the IKEGAMI GFPAK or a USB memory card
reader. Simply attach the GFPAK or memory card reader to the “eSATA/USB-Host”
combo slot using the supplied USB cable