User Manual

11
Q:Do I need to connect the camera with network cable?
A:
No, the cameras are wireless. But you need to connect the camera with a power
supply. The cameras and NVR are already paired. The camera will connect with the
NVR automatically once attached to a power supply.
No Internet(Not connect NVR box to router): You can view the live video, record
and playback in local place.
With Internet(Connect NVR box to router): You can view the live video, record,
playback and view remotely by your smartphone, laptop and computer.
Do not attempt to install your cameras until you are able to view images on your TV
or PC monitor first.
Q:How can I troubleshoot camera issues?
A:First check to see if the power adapter and the antenna are working by testing
with another power adapter and antenna. lf the power adapter and antenna is
functioning, move the camera close to NVR box to check whether you have video or
not. lf there is no video, cover the photocell with your finger as shown in the figure
below. If the IR-CUT light turns red, the camera is working. If it does not turn red, this
indicates that the camera has experienced a malfunction.In this case,please contact
us for after sale service.We will provide replacement as soon as possible.
Q:How can I get motion notifications on my Smartphone?
A:
First right click your mouse>Main Menu>Advanced>Version> verify that the Nat
status is CONNECTED.Next, from the home screen of your monitor, right click the
mouse, navigate to Main Menu > Alarm > Motion Detect. Next, select the following:
Enable for Motion Detection, Show Message, Send E-mail and Mobile reported.
Click Ok.
Cover the
photocell