User Manual

13
Q:How do I use a USB to Back-up my data?
A: You need to make sure you have recorded video in your hard driver first,then you
need to insert USB storage on the back of the NVR. From the home screen of your
monitor, navigate to Main Menu>System>Back up>click Detect to check if you can
find the information of the USB.(If can’t find the information of the USB,you need to
remove the USB and format it to FAT32 on the computer),then repeat the process
to detect the USB, click back up and select all or any channel(s) you prefer, select
the particular time frame you desire, then click Start to back up.
Q:How do I add a new camera? What should I do when there is
no camera display on the screen?
A:
In some situations, you may need to add a new camera to your NVR. For exam-
ple, you may need to replace a broken camera, or if you have an expandable NVR,
you can also add cameras.
Remove the network cable between NVR and router, plug the camera into the power
supply, connect the NVR to the camera with a network cable directly. From the home
screen of your monitor, right click your mouse and navigate to Main Menu>Wire-
less>click Code for Wireless to match code for the camera. The camera channel will
connect automatically. When the channel says Connected, you will no longer need a
network cable for the camera; the cable can then be removed between the camera
and the NVR. Connect the NVR with the router by network cable again.