Specification

Bright Star Lighting Co.,Ltd
MSD-CV-100W series
Model Product Modle MSD-CV-100W
Output
Input
Protection
Environment
Safety
Fit Standard
Others
Note
Storage Temp.Humidity
Withstand Vibration
Withstand Voltage
Isolated Resistance
Safety Standard
EMC Standard
Dimension
Weight/Packing
Lifespan
No Load Power Consumption
MTBF
(Note3)
(Note3)
Specification Sheet
High PF Constant Voltage Waterproof LED Power Supply
IP
67
12V 24V 36V
180mvp-p 150mvp-p 150mvp-p
85~265VAC
47~63HZ
1.28A/115VAC,0.64A/230VAC
88%
Cold start current 20A/115VAC, 40A/230VAC
<2.5mA/240VAC
±1%(currentlimitingtype)
110%~130%(Shutdownandlatchoff O/P voltage,repower on to recover)
130% (Shut down and latch off O/P voltage,repower on to recover)
Hiccup mode.recovers automatically after troubleshoot
85˚C±10˚C (Shut down O/P voltage,re~power on to recover)85˚C±10˚C (Shut down O/P voltage,re~power on to recover)
-40℃~+50℃，10%~90%RH
-40℃~+70℃，10%~95%RH non condensing
10~500HZ，2G 10min/1cycle，period for 60minutes，each axes
I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
I/P-O/P、I/P-FG、O/P-FG: 100M ohms/500VDC
Fit UL1012，IP67 protection level
Fit EN 55015/EN 61000/EN 61547，CLASS A
L190*W70*H40mm
960G/10pcs/9.6kg
≥50000Hrs(25~30℃)
≤1W
250K hrs min,MIL-HDBK-217F
8.33A 4.16A 2.78A
100W 100W 100W
±3.0% ±3.0% ±3.0%
±3.0% ±3.0% ±3.0%
±1% ±1% ±1%
±1.0% ±1.0% ±1.0%
500ms 80ms/230VAC ,600ms 80ms/110VAC
50ms/230VAC,25ms/110VAC @ full load
N/A
Working Environment Temp.Humidty
Features:
•Constant Voltage mode LED power supply.
•Universal AC input/full range .
•Withstand 3750VAC surge input for 5 seconds.
•Built-in active PFC funtion 0.98 Efficiency>88%@full load.
•Available for customizing output current/voltage.
•Protections: Short Circuit/Over Load/Over Voltage/Over Temperature.
•Cooling by free air convection.
•Fully encapsulated with IP67 level.
•2~3 times burn-in tests with 100% full toad for more than 24 hours.
•Rubycon capacitor, 5 years warranty.
DC (max)
Rated Power
Ripple&Noise
Current Tolerance
Voltage Accuracy
Line Regulation
Load Regulation
Set-up,Rise Time
Hold-up Time
Dimmable Function
Voltage Range
Frequency
AC Current
Efficiency (Typ.)
Inrush Current
Leakage Current
Current Protection
Over-Voltage
Over-Load
Short Circuit
Over-Temperature
DC Voltage
Current
(Note1)
(Note2)
All parameters are measured at normal temperture (+25~+28 )
1、Ripple & Noise are measured at 20KHz of bandwidth by using a 12" twisted pair-wire teminated with a 0.1 uf & 47uf parallel
capacitor(@ full load).
2、The efficiency measured at Max output voltage,and 230VAC with full load,if with 110VAC the efficiency will be lowered 0.5%~1.5%;
Working 1~2 hours,efficiency will be higher 1.5%~1%than the initial stage.
3、This measured at 120VAC ,80%~85% load with environmental temperature about +25℃~+30℃.the housing temperature with
+55℃ or so.
℃