Installation Guide

TOUCH UP

FINISHING THE JOB FOR A

PROFESSIONAL APPEARANCE

Panel cuts which result in exposed

polyurethane must be coated to

prevent discoloration. The

NextStone™ Touch Up Kit contains

touch up paint, instructions and

brushes. Each kit is specific to the

panel colors and rock profile.

Step 1

Inspect the job closely for any nicks, scratches or exposed cut edges of panels and apply

the appropriate touch-up paint. Some applications may require caulking which can be

concealed with touch-up paint. Any areas where deviation from standard NextStone™

installation practices is required must be caulked and touched up.

Step 2

NextStone™ touch up paint is latex based and can be cleaned-up with warm, soapy

water. Clean hands, spills and tools immediately after use. The paint has been thinned

to be used with the spray gun however additional thinning, if necessary, can be done by

adding water. Protect paint from freezing by keeping at room temperature.

Step 3

Touch – up paint can be applied by using the brush provided. Be sure to shake bottles

well before using.

Touch Up Paint Kit