Installation Guide

TOUCH UP

Touch Up Paint Kit

Panel cuts resulting in exposed

polyurethane must be coated to

pre v ent di s col o rat i on. T h e

NextStone™ Touch Up Kit contains

touch up paint, instructions and

brushes. Each kit is specific to the

panel colors and rock profile.

FINISHING THE JOB FOR A

PROFESSIONAL APPEARANCE

Step 1

Inspect the job closely for any nicks, scratches or exposed cut edges of panels and

apply the appropriate touch-up paint. Some applications may require caulking

which should be concealed with touch-up paint. Any areas where deviation from

standard NextStone™ installation practices is required must be caulked and touched

up.

Step 2

NextStone™ touch up paint is latex based and can be cleaned using warm, soapy

water. Clean hands, spills and tools immediately after use. The paint has been

thinned to be used with the spray gun however if additional thinning is necessary, it

can be done by adding water. Protect paint from freezing by keeping at room

temperature.

Step 3

Touch Up paint can be applied by using the brush provided. Be sure to shake bottles

well before using.