Installation Guide

8
PRODUCT LINE
SANDSTONE ACCESSORIES
Sandstone Ledger - 4pcs. per box for a total of 16
linear feet. Dimensions are 2½" x 4" x 48". Used as a
water sill and aids in the transition between other
siding products and NextStone™ Panels in wainscot
installations.
Sandstone Ledger Outside Corner - 2pcs. per box.
Dimensions are 4¼" x 6¼" x 2½". Used to wrap corners in
conjunction with Ledgers. Prevents the need for compound
miter cuts or caulking 90˚ joints.
Sandstone Ledger Inside Corner - 2pcs. per box.
Dimensions are 9 ¾" x 7 ⅝" x 2½". Used to wrap corners in
conjunction with Ledgers. Prevents the need for compound
miter cuts or caulking 90˚ joint.
Sandstone Small Mounting Block - 1pc per box. Dimensions
are 8" x 9" x 2¼". Used behind hose bibs, electrical boxes, small
electrical fixtures, etc. Provides a flush mounting surface for
watertight installations.
Sandstone Window and Door Trim - 4pcs. per
box for a total of 16 linear feet. Dimensions are
2¼" x 3½" x 48". Used to trim around doors and windows.
Can also be used as termination ends for wall
applications.
Sandstone Large Mounting Block - 1pc per box. Dimensions
are 10" x 13" x 2¼". Numerous uses such as mounting large exterior
lights or as a house address plaque. Provides a flush mounting
surface for watertight installations.
Metal Starter Strip - 2" x 48". Used to begin the first
(bottom) course of NextStone™ panels by securing the
bottom panel and avoiding the need to face screw. Ensures
level installation.
RECOMMENDED WITH EVERY INSTALL
Touch Up Paint Kit & Grout - Used to finish cut
ends, sealing miter joints, cover surface damage, or
general touch up.