Installation Guide

32
TOUCH UP
Touch Up Paint Kit
Panel cuts resulting in exposed
polyurethane must be coated to
pre v ent di s col o rat i on. T h e
NextStone™ Touch Up Kit contains
touch up paint, instructions and
brushes. Each kit is specific to the
panel colors and rock profile.
FINISHING THE JOB FOR A
PROFESSIONAL APPEARANCE
Step 1
Inspect the job closely for any nicks, scratches or exposed cut edges of panels and
apply the appropriate touch-up paint. Some applications may require caulking
which should be concealed with touch-up paint. Any areas where deviation from
standard NextStone™ installation practices is required must be caulked and touched
up.
Step 2
NextStone™ touch up paint is latex based and can be cleaned using warm, soapy
water. Clean hands, spills and tools immediately after use. The paint has been
thinned to be used with the spray gun however if additional thinning is necessary, it
can be done by adding water. Protect paint from freezing by keeping at room
temperature.
Step 3
Touch Up paint can be applied by using the brush provided. Be sure to shake bottles
well before using.