Installation Guide

9
PRODUCT LINE
SPECIALTY ACCESSORIES
Slatestone 1pc Post Cover (Sleeve)
Outside dimensions are 8" x 8" x 41". Can be installed over any
nominal 4x4 or 6x6 post or column. Post covers can be stacked for
taller post applications or cut for shorter applications. Converter
Kits are available to fir out 4x4 posts and are sold separately.
Slatestone Post Cover Cap - 10½" x 10½" x 3". Used for
any 8" x 8" Slatestone Post Cover.
Slatestone 30" Column Wrap
Outside dimensions are 16" x 16" x 30". Four finger jointed
panels are used to wrap columns. Inside Dimensions are
13⅞" x 13⅞". Can be stacked for taller applications or cut for
shorter applications.
Sandstone 18" Column Wrap Cap - 18" x 18" x 3½".
Used for all Slatestone 30" Column Wraps and Columns made
from Interlocking Outside Corners.
Slatestone 2pc Post Cover (Split)
Outside dimensions are 8" x 8" x 41". Split Post Covers are for
installing around existing posts or columns that can not detach.
Can be installed around any nominal 4x4 or 6x6 post or column.
Post covers can be stacked for taller post applications or cut
for shorter applications. Converter Kits are available to fir out
4x4 posts and are sold separately.
NOTE: INSIDE POST SIZES ARE NOMINAL 4X4 AND 6X6.
TRUE DIMENSIONS ARE 3½" X 3½" AND 5½" X 5½".