Installation Guide

53
ACCESSORIES
1. Sandstone Ledger dimensions are 2 ½" x 4" x 48"
Configure Horizontal Linear Feet.
Total Linear Feet ______ / 4' = number of pieces of Ledger.
 This accessory is used to trim out the top row and can be used with any rock profile.
Four (4) Ledgers per box.
2. Sandstone Window/Door Trim dimensions are 2 ¼" x 3 ½" x 48"
Configure Vertical and Horizontal Linear Feet.
Total Linear Feet _____ / 4' = number of pieces of window/door trim.
 Window/Door Trim will be used on all four window sides as well as the top and sides of
door openings and can be used with any rock profile. Four (4) Trim per box.
3. Sandstone Ledger Outside Corner dimensions are 4 ¼" x 6 ¼" x 2 ½"
Sandstone Ledger Inside Corner dimensions are 9 ¾" x 7 ⅝" x 2 ½"
Ledger Outside and Inside Corners are used to cap corners and show a continuous run of the
Ledger trim piece. Number of pieces depend on number of corners. Two (2) per box,
1 Left / 1 Right.
4. Metal Starter Strips are in 4' lengths.
Configure Horizontal Linear Feet of area to be covered.
Total Linear Feet _______ / 4' =______ number of pieces of starter strip.
- Used to begin the bottom row, Starter Strips are suggested under each panel in order to avoid
face screwing.
5. 12oz. Tubes of Grout _____. (Depending on project, grout/caulk, may or may not be
required).
6. Touch Up Paint Kit _____.
Drystack, Ledgestone, and Random Rock Touch up Paint Kits contain Four 120 cc bottles of
paint, one for each panel color and 1 trim color, plus 4 brushes.
Slatestone Touch Up Paint Kits contain One 120cc and 2 60cc bottles of paint, plus 1 brush.
TAKE-OFF SHEET