Installation Guide

51
Note: In all spec data information, weights and dimensions are approximate.
Individual pieces may vary due to the manufacturing process.
Technical Data:
Color Fastness (per ANSI Z 124 xenon arc test): color change @ 2000 hours: 0
Specific Gravity: .6
Insulation value: R 4.5 per inch of thickness
Hardness (durometer D): 68
Coefficient of Expansion (in. /in. F): 4.8"/in./C x 10(-5) (varies depending upon substrate attached to).
Fuel Contributed: 0
Flame Spread (per ASTM E162): Flame Spread Index 191.13
Wind Load Test-( per ASTM E330-02)- Withstands Positive and Negative winds over 200 MPH.
Installation: Detailed installation instr uctions are available fr om your local distr ibutor or on line at:
www.NextStone™.com.
Maintenance: NextStone™ pr oducts r equire minimal maintenance. Occasional rinsing with water is recommended.
Prior to using any chemical products on NextStone™, test a small inconspicuous area, verifying that no undesired side effects
have occurred.
Warranty: Warr anty infor mation is available fr om your local distr ibutor or online at: www.NextStone™.com.
Important: The infor mation and data herein are believed to be accur ate and have been compiled from sources believed
to be reliable. It is offered for you consideration, investigation and verification. Due to the inherent manufacturing
characteristics of polyurethane, and the In Mold coating coloring process of our product, dimensions and weights are
Flame Spread Factor, F9: Heat Evolution Factor, Q: Flame Spread Index, I8: Ave Temp. Rise:
30.78 6.23 191.13 53.8 c
Product Description:
NextStone™’s masons and master craftsmen have created products that are an ideal
combination of stone textures and sizes, melding them artistically into an extremely easy to
install paneling system. NextStone™ products are a light weight veneer wall panel system,
providing a very realistic “rock wall” appearance. These products are intended for exterior
applications over masonry, wood framed, or metal framed construction, be it residential or
commercial. The products have been engineered to eliminate additional structural or foundation
support requirements. The basic system requires no caulking.
NextStone™ products are made of uniquely formulated closed cell polyurethane, incorporating
UV inhibitors and fire retardants. The panels and accessory pieces have been cast from real
stone giving them a remarkably realistic rock look. A specially formulated “In Mold Coating”
is chemically and mechanically bonded with the molded surface of the panel. The result is a
lightweight, durable wall panel system with a realistic rock finish.
Limitations:
NextStone™ products are intended as wall coverings only and should not be used as pavers or
subjected to foot traffic. NextStone™ products do not add to the structural load bearing
capacity of the substrate to which it is applied. If NextStone™ products are used below grade
or water level, discoloration of the product can occur from the leaching of minerals and
chemicals from the soil and water. The product will not be altered or degraded, but color
fastness is not guaranteed. Avoid installing in locations which will be repeatedly subjected to
abrasion, or repeated contact such as lawn mowers and string trimmers.
SPEC DATA