Installation guide

Installation Instructions

Different methods are used for different applications:

 For pedestal-mounted screens, the touch overlay can be fitted to the

screen where it stands.

 For wall-mounted screens, the screen may need to be removed from the

wall first and then fitted to the touch overlay.

The installation normally requires two people.

Preparation

1. Make sure the monitor is stable and situated so that you can walk all

around it.

2. After unpacking and checking for any damage, place the touch overlay

face down on a soft surface, such as a clean carpet.

3. Make sure the back surface of the glass is clean.

Important, before you start



If the display screen’s on/off button could be obscured by the touch

overlay, make sure the button is in the ON position before you install the

overlay, but make sure the screen is turned off by using the remote

control unit or wall switch.

 Identify where the air vents are on the monitor so that you can make sure

they are not obscured by the overlay or the securing straps.