Installation guide

8
Installing on a Pedestal-Mounted Monitor
1. Stand the touch overlay on its bottom edge and carefully flip the top
securing straps (the shorter ones) over to the front of the overlay.
2. Lift the overlay onto the monitor at an angle as shown below and locate
the top edge first.
3. Lower the bottom edge of the overlay into place.
4. While holding the overlay in place so that it cannot fall off, attach the
straps at the rear and pull tight to secure the overlay.
Note: You need two hands to fasten the straps.
It is advisable to have
someone hold the overlay securely in place while you do this.
Short strap