Installation guide

10
Installing on a Wall-Mounted Monitor
To install the touch overlay on a wall-mounted monitor, first remove the
monitor from the wall, and then place it onto the overlay. This will require two
people.
Lower the monitor onto the touch overlay, top edge first.
Make sure the top is
a snug fit, then lower the bottom onto the overlay.
Tighten the straps firmly around the display screen, making sure that they do
not cover any connections or air vents.
Re-hanging the monitor
Re-hang the monitor onto the wall, taking care not to dislodge the touch
overlay.
Connecting Cables and Switching On
Connect the cables and switch on power in the following order:
1. Connect the video cable from the computer to the monitor.
2. Connect power to the monitor and switch on.
3. Connect power to the computer and switch on.
4. The next part of the installation depends on whether you are using the
USB or the serial communications option. The appropriate procedures
are described in the following sections.