Installation guide

11
USB Installation
USB installations require no special software; the touch overlay
communicates directly with the computer’s operating system via the USB
interface, just like a USB mouse.
Connect the USB cable from the touch overlay to the computer.
Velcro
cable tie
You can use the Velcro cable-tie provided in order to fasten the USB cable at
the back of the monitor.
Once the cable is connected, the computer automatically detects the USB
device (the touch overlay) and, after a short pause, displays a series of
messages on screen.
(Note: the computer only displays the above message the first time you plug
in the USB cable.
The next time you plug in the cable, the computer will be
already configured for the device.)