Installation guide

19
Operating the Touch Screen
Mouse actions
NextWindow's 2700 Touch Overlay provides full mouse functionality—click,
drag, double-click and right-click.
 Single click is performed by tapping you finger once on the screen.
 Double click is performed by tapping your finger twice on the screen in
quick succession.
 Drag is performed by touching and moving your finger across the screen
without lifting off.
 Right click is performed by touching and holding your finger in one
position for a short time.
The sensitivity of double-click and right-click can be set using NextWindow's
USB Config software
5
. You can disable the right-click function completely by
setting its response time to zero.
When you touch the screen by default it emits a beep. You can disable this by
setting the buzzer time to zero using the USB Config software.
Operating notes
The touch screen does not require
pressure to sense a touch.
For best results, point at roughly right
angles to the screen and keep the rest
of your hand clear of the glass.
When removing your finger, lift it straight
off the screen, making sure you don’t
drag it across the screen.
5
Part of the Touch+ Suite. See page 16.