Installation guide

2
Introduction
Congratulations on your purchase of a NextWindow 2700 Touch Overlay.
This product turns a large-format display, such as a plasma or LCD, into an
interactive display. You can control a computer application simply by
touching the screen.
The 2700 can be connected to the computer via a serial or USB cable, thus
providing maximum versatility. The USB option is HID compliant, providing
true plug-and-play operation, just like a USB mouse.
The standard 2700 Overlay is powered via the USB interface from the
computer and hence does not require a separate power supply.
To use the serial option, you need to purchase the Serial Pack and also install
the serial communications program, which is part of the Touch+ software
suite (see below).
The main steps to install the 2700 Touch Overlay are as follows:
 Unpack the 2700 Touch Overlay.
 Fit the touch overlay to the display screen.
 Connect all the cables.
 Perform a simple calibration procedure.
Touch+ Software Suite
For USB communications, you do not need to install any software. However,
an optional USB Configuration program that allows you to change various
default settings is available in the Touch+ software suite.
Touch+ is provided on a CD with the product and can also be downloaded
from NextWindow’s website.
Once installed, these programs are available from the Start / Programs /
NextWindow Touch+ menu.